This is an outdated version of the HTCondor Manual. You can find current documentation at http://htcondor.org/manual.
next up previous contents index
Next: condor_qedit Up: 10. Command Reference Manual Previous: condor_procd   Contents   Index

Subsections


condor_q

Display information about jobs in queue

Synopsis

condor_q [-help]

condor_q [-debug] [-global] [-submitter submitter] [-name name] [-pool centralmanagerhostname[:portnumber]] [-analyze] [-run] [-hold] [-globus] [-goodput] [-io] [-dag] [-long] [-xml] [-attributes Attr1 [,Attr2 ... ]] [-format fmt attr] [-cputime] [-currentrun] [-avgqueuetime] [-jobads file] [-machineads file] [-stream-results] [-wide] [{cluster | cluster.process | owner | -constraint expression ... } ]

Description

condor_q displays information about jobs in the HTCondor job queue. By default, condor_q queries the local job queue but this behavior may be modified by specifying:

To restrict the display to jobs of interest, a list of zero or more restrictions may be supplied. Each restriction may be one of:

If no owner restrictions are present in the list, the job matches the restriction list if it matches at least one restriction in the list. If owner restrictions are present, the job matches the list if it matches one of the owner restrictions and at least one non-owner restriction.

If the -long option is specified, condor_q displays a long description of the queried jobs by printing the entire job ClassAd. The attributes of the job ClassAd may be displayed by means of the -format option, which displays attributes with a printf(3) format. Multiple -format options may be specified in the option list to display several attributes of the job. If neither -long or -format are specified, condor_q displays a a one line summary of information as follows:

ID
The cluster/process id of the condor job.
OWNER
The owner of the job.
SUBMITTED
The month, day, hour, and minute the job was submitted to the queue.
RUN_TIME
Wall-clock time accumulated by the job to date in days, hours, minutes, and seconds.
ST
Current status of the job, which varies somewhat according to the job universe and the timing of updates. H = on hold, R = running, I = idle (waiting for a machine to execute on), C = completed, X = removed, and > = transferring output.
PRI
User specified priority of the job, ranges from -20 to +20, with higher numbers corresponding to greater priority.
SIZE
The value of job ClassAd attribute MemoryUsage (in Mbytes), when the attribute is defined, and ImageSize (in Kbytes), otherwise.
CMD
The name of the executable.

If the -dag option is specified, the OWNER column is replaced with NODENAME for jobs started by the condor_dagman instance.

If the -run option is specified, the ST, PRI, SIZE, and CMD columns are replaced with:

HOST(S)
The host where the job is running.

If the -globus option is specified, the ST, PRI, SIZE, and CMD columns are replaced with:

STATUS
The state that HTCondor believes the job is in. Possible values are
PENDING
The job is waiting for resources to become available in order to run.
ACTIVE
The job has received resources, and the application is executing.
FAILED
The job terminated before completion because of an error, user-triggered cancel, or system-triggered cancel.
DONE
The job completed successfully.
SUSPENDED
The job has been suspended. Resources which were allocated for this job may have been released due to a scheduler-specific reason.
UNSUBMITTED
The job has not been submitted to the scheduler yet, pending the reception of the GLOBUS_GRAM_PROTOCOL_JOB_SIGNAL_COMMIT_REQUEST signal from a client.
STAGE_IN
The job manager is staging in files, in order to run the job.
STAGE_OUT
The job manager is staging out files generated by the job.
UNKNOWN
MANAGER
A guess at what remote batch system is running the job. It is a guess, because HTCondor looks at the Globus jobmanager contact string to attempt identification. If the value is fork, the job is running on the remote host without a jobmanager. Values may also be condor, lsf, or pbs.
HOST
The host to which the job was submitted.
EXECUTABLE
The job as specified as the executable in the submit description file.

If the -goodput option is specified, the ST, PRI, SIZE, and CMD columns are replaced with:

GOODPUT
The percentage of RUN_TIME for this job which has been saved in a checkpoint. A low GOODPUT value indicates that the job is failing to checkpoint. If a job has not yet attempted a checkpoint, this column contains [?????].
CPU_UTIL
The ratio of CPU_TIME to RUN_TIME for checkpointed work. A low CPU_UTIL indicates that the job is not running efficiently, perhaps because it is I/O bound or because the job requires more memory than available on the remote workstations. If the job has not (yet) checkpointed, this column contains [??????].
Mb/s
The network usage of this job, in Megabits per second of run-time.

If the -io option is specified, the ST, PRI, SIZE, and CMD columns are replaced with:

READ The total number of bytes the application has read from files and sockets.
WRITE The total number of bytes the application has written to files and sockets.
SEEK The total number of seek operations the application has performed on files.
XPUT The effective throughput (average bytes read and written per second) from the application's point of view.
BUFSIZE The maximum number of bytes to be buffered per file.
BLOCKSIZE The desired block size for large data transfers.

These fields are updated when a job produces a checkpoint or completes. If a job has not yet produced a checkpoint, this information is not available.

If the -cputime option is specified, the RUN_TIME column is replaced with:

CPU_TIME
The remote CPU time accumulated by the job to date (which has been stored in a checkpoint) in days, hours, minutes, and seconds. (If the job is currently running, time accumulated during the current run is not shown. If the job has not produced a checkpoint, this column contains 0+00:00:00.)

The -analyze option may be used to determine why certain jobs are not running by performing an analysis on a per machine basis for each machine in the pool. The reasons may vary among failed constraints, insufficient priority, resource owner preferences and prevention of preemption by the PREEMPTION_REQUIREMENTS expression. If the -long option is specified along with the -analyze option, the reason for failure is displayed on a per machine basis.

Options

-help
Get a brief description of the supported options
-global
Get queues of all the submitters in the system
-debug
Causes debugging information to be sent to stderr, based on the value of the configuration variable TOOL_DEBUG
-submitter submitter
List jobs of specific submitter from all the queues in the pool
-pool centralmanagerhostname[:portnumber]
Use the centralmanagerhostname as the central manager to locate schedds. (The default is the COLLECTOR_HOST specified in the configuration file.
-analyze
Perform an analysis to determine how many resources are available to run the requested jobs. These results are only meaningful for jobs using HTCondor's matchmaker. This option is never meaningful for Scheduler universe jobs and only meaningful for grid universe jobs doing matchmaking.
-run
Get information about running jobs.
-hold
Get information about jobs in the hold state. Also displays the time the job was placed into the hold state and the reason why the job was placed in the hold state.
-globus
Get information only about jobs submitted to grid resources described as gt2 or gt5.
-goodput
Display job goodput statistics.
-io
Display job input/output summaries.
-dag
Display DAG node jobs under their condor_dagman instance. Child nodes are listed using indentation to show the structure of the DAG.
-name name
Show only the job queue of the named schedd
-long
Display job ads in long format
-xml
Display job ads in XML format. The XML format is fully defined in the reference manual, obtained from the ClassAds web page, with a link at http://research.cs.wisc.edu/htcondor/research.html.
-attributes Attr1 [,Attr2 ... ]
Explicitly list the attributes (by name, and in a comma separated list) which should be displayed when using the -xml or -long options. Limiting the number of attributes increases the efficiency of the query.
-format fmt attr
Display attribute or expression attr in format fmt. To display the attribute or expression the format must contain a single printf(3)-style conversion specifier. Attributes must be from the job ClassAd. Expressions are ClassAd expressions and may refer to attributes in the job ClassAd. If the attribute is not present in a given ClassAd and cannot be parsed as an expression, then the format option will be silently skipped. The conversion specifier must match the type of the attribute or expression. %s is suitable for strings such as Owner, %d for integers such as ClusterId, and %f for floating point numbers such as RemoteWallClockTime. %v identifies the type of the attribute, and then prints the value in an appropriate format. %V identifies the type of the attribute, and then prints the value in an appropriate format as it would appear in the -long format. As an example, strings used with %V will have quote marks. An incorrect format will result in undefined behavior. Do not use more than one conversion specifier in a given format. More than one conversion specifier will result in undefined behavior. To output multiple attributes repeat the -format option once for each desired attribute. Like printf(3) style formats, one may include other text that will be reproduced directly. A format without any conversion specifiers may be specified, but an attribute is still required. Include $\mathtt{\backslash}$n to specify a line break.
-cputime
Instead of wall-clock allocation time (RUN_TIME), display remote CPU time accumulated by the job to date in days, hours, minutes, and seconds. (If the job is currently running, time accumulated during the current run is not shown.)
-currentrun
Normally, RUN_TIME contains all the time accumulated during the current run plus all previous runs. If this option is specified, RUN_TIME only displays the time accumulated so far on this current run.
-avgqueuetime
Display the average of time spent in the queue, considering all jobs not completed (those that do not have JobStatus == 4 or JobStatus == 3.
-jobads file
Display jobs from a list of ClassAds from a file, instead of the real ClassAds from the condor_schedd daemon. This is most useful for debugging purposes. The ClassAds appear as if condor_q -l is used with the header stripped out.
-machineads file
When doing analysis, use the machine ads from the file instead of the ones from the condor_collector daemon. This is most useful for debugging purposes. The ClassAds appear as if condor_status -l is used.
-stream-results
Display results as jobs are fetched from the job queue rather than storing results in memory until all jobs have been fetched. This can reduce memory consumption when fetching large numbers of jobs, but if condor_q is paused while displaying results, this could result in a timeout in communication with condor_schedd.
-wide
If this option is specified, and the command portion of the output would cause the output to extend beyond 80 columns, display beyond the 80 columns.
Restriction list
The restriction list may have zero or more items, each of which may be:
cluster
match all jobs belonging to cluster
cluster.proc
match all jobs belonging to cluster with a process number of proc
-constraint expression
match all jobs which match the ClassAd expression constraint
A job matches the restriction list if it matches any restriction in the list Additionally, if owner restrictions are supplied, the job matches the list only if it also matches an owner restriction.

General Remarks

The default output from condor_q is formatted to be human readable, not script readable. In an effort to make the output fit within 80 characters, values in some fields might be truncated. Furthermore, the HTCondor Project can (and does) change the formatting of this default output as we see fit. Therefore, any script that is attempting to parse data from condor_q is strongly encouraged to use the -format option (described above, examples given below).

Although -analyze provides a very good first approximation, the analyzer cannot diagnose all possible situations because the analysis is based on instantaneous and local information. Therefore, there are some situations (such as when several submitters are contending for resources, or if the pool is rapidly changing state) which cannot be accurately diagnosed.

-goodput, -cputime, and -io are most useful for STANDARD universe jobs, since they rely on values computed when a job checkpoints.

It is possible to to hold jobs that are in the X state, to avoid this it is best to construct a -constraint expression that contains 'JobStatus != 3' if the user wishes to avoid this condition.

Examples

The -format option provides a way to specify both the job attributes and formatting of those attributes. There must be only one conversion specification per -format option. As an example, to list only Jane Doe's jobs in the queue, choosing to print and format only the owner of the job, the command line arguments for the job, and the process ID of the job:

%condor_q -submitter jdoe -format "%s" Owner -format " %s " Args -format "ProcId = %d\n" ProcId
jdoe 16386 2800 ProcId = 0
jdoe 16386 3000 ProcId = 1
jdoe 16386 3200 ProcId = 2
jdoe 16386 3400 ProcId = 3
jdoe 16386 3600 ProcId = 4
jdoe 16386 4200 ProcId = 7

To display only the JobID's of Jane Doe's jobs you can use the following.

%condor_q -submitter jdoe -format "%d." ClusterId -format "%d\n" ProcId
27.0
27.1
27.2
27.3
27.4
27.7

An example that shows the difference (first set of output) between not using an option to condor_q and (second set of output) using the -globus option:

 ID      OWNER            SUBMITTED     RUN_TIME ST PRI SIZE CMD
 100.0   smith          12/11 13:20   0+00:00:02 R  0   0.0  sleep 10

1 jobs; 0 idle, 1 running, 0 held



 ID      OWNER          STATUS  MANAGER  HOST                EXECUTABLE
 100.0   smith         ACTIVE fork     grid.example.com       /bin/sleep

Exit Status

condor_q will exit with a status value of 0 (zero) upon success, and it will exit with the value 1 (one) upon failure.

Author

Center for High Throughput Computing, University of Wisconsin-Madison

Copyright

Copyright © 1990-2012 Center for High Throughput Computing, Computer Sciences Department, University of Wisconsin-Madison, Madison, WI. All Rights Reserved. Licensed under the Apache License, Version 2.0.

See the HTCondor Version 7.8.8 Manual or http://research.cs.wisc.edu/htcondor/ for additional notices.


next up previous contents index
Next: condor_qedit Up: 10. Command Reference Manual Previous: condor_procd   Contents   Index
htcondor-admin@cs.wisc.edu