This is an outdated version of the HTCondor Manual. You can find current documentation at http://htcondor.org/manual.

2.11 Virtual Machine Applications

The vm universe facilitates a Condor job that matches and then lands a disk image on an execute machine within a Condor pool. This disk image is intended to be a virtual machine. In this manner, the virtual machine is the job to be executed.

This section describes this type of Condor job. See section 3.3.28 for details of configuration variables.

2.11.1 The Submit Description File

Different than all other universe jobs, the vm universe job specifies a disk image, not an executable. Therefore, the submit commands input, output, and error do not apply. If specified, condor_submit rejects the job with an error. The executable command changes definition within a vm universe job. It no longer specifies an executable file, but instead provides a string that identifies the job for tools such as condor_q. Other commands specific to the type of virtual machine software identify the disk image.

VMware, Xen, and KVM virtual machine software are supported. As these differ from each other, the submit description file specifies one of

  vm_type = vmware

or

  vm_type = xen

or

  vm_type = kvm

The job is required to specify its memory needs for the disk image with vm_memory, which is given in Mbytes. Condor uses this number to assure a match with a machine that can provide the needed memory space.

Virtual machine networking is enabled with the command

  vm_networking = true

And, when networking is enabled, a definition of vm_networking_type as bridge matches the job only with a machine that is configured to use bridge networking. A definition of vm_networking_type as nat matches the job only with a machine that is configured to use NAT networking. When no definition of vm_networking_type is given, Condor may match the job with a machine that enables networking, and further, the choice of bridge or NAT networking is determined by the machine's configuration.

Modified disk images are transferred back to the machine from which the job was submitted as the vm universe job completes. Job completion for a vm universe job occurs when the virtual machine is shut down, and Condor notices (as the result of a periodic check on the state of the virtual machine). Should the job not want any files transferred back (modified or not), for example because the job explicitly transferred its own files, the submit command to prevent the transfer is

  vm_no_output_vm = true

The required disk image must be identified for a virtual machine. This vm_disk command specifies a list of comma-separated files. Each disk file is specified by colon-separated fields. The first field is the path and file name of the disk file. The second field specifies the device. The third field specifies permissions, and the optional fourth specifies the format. Here is an example that identifies a single file:

  vm_disk = /var/lib/libvirt/images/swap.img:sda2:w:raw

Setting values in the submit description file for some commands have consequences for the virtual machine description file. These commands are

• vm_memory
• vm_macaddr
• vm_networking
• vm_networking_type
• vm_disk

For VMware virtual machines, setting values for these commands causes Condor to modify the .vmx file, overwriting existing values. For KVM and Xen virtual machines, Condor uses these values when it produces the description file.

For Xen and KVM jobs, if any files need to be transferred from the submit machine to the machine where the vm universe job will execute, Condor must be explicitly told to do so with the standard file transfer attributes:

  should_transfer_files = YES
  when_to_transfer_output = ON_EXIT
  transfer_input_files = /myxen/diskfile.img,/myxen/swap.img

Any and all needed files on a system without a shared file system (between the submit machine and the machine where the job will execute) must be listed.

Further commands specify information that is specific to the virtual machine type targeted.

2.11.1.1 VMware-Specific Submit Commands

Specific to VMware, the submit description file command vmware_dir gives the path and directory (on the machine from which the job is submitted) to where VMware-specific files and applications reside. One example of a VMware-specific application is the VMDK files, which form a virtual hard drive (disk image) for the virtual machine. VMX files containing the primary configuration for the virtual machine would also be in this directory.

Condor must be told whether or not the contents of the vmware_dir directory must be transferred to the machine where the job is to be executed. This required information is given with the submit command vmware_should_transfer_files. With a value of True, Condor does transfer the contents of the directory. With a value of False, Condor does not transfer the contents of the directory, and instead presumes that access to this directory is available through a shared file system.

By default, Condor uses a snapshot disk for new and modified files. They may also be utilized for checkpoints. The snapshot disk is initially quite small, growing only as new files are created or files are modified. When vmware_should_transfer_files is True, a job may specify that a snapshot disk is not to be used with the command

  vmware_snapshot_disk = False

In this case, Condor will utilize original disk files in producing checkpoints. Note that condor_submit issues an error message and does not submit the job if both vmware_should_transfer_files and vmware_snapshot_disk are False.

Note that if snapshot disks are requested and file transfer is not being used, the vmware_dir setting given in the submit description file should not contain any symbolic link path components. This is to work around the issue discussed in the FAQ entry in section 7.3.

Here is a sample submit description file for a VMware virtual machine:

universe                     = vm
executable                   = vmware_sample_job
log                          = simple.vm.log.txt
vm_type                      = vmware
vm_memory                    = 64
vmware_dir                   = C:\condor-test
vmware_should_transfer_files = True
queue

This sample uses the vmware_dir command to identify the location of the disk image to be executed as a Condor job. The contents of this directory are transferred to the machine assigned to execute the Condor job.

2.11.1.2 Xen-Specific Submit Commands

A Xen vm universe job requires specification of the guest kernel. The xen_kernel command accomplishes this, utilizing one of the following definitions.

1. xen_kernel = included implies that the kernel is to be found in disk image given by the definition of the single file specified in vm_disk.

2. xen_kernel = path-to-kernel gives a full path and file name of the required kernel. If this kernel must be transferred to machine on which the vm universe job will execute, it must also be included in the xen_transfer_files command.

   This form of the xen_kernel command also requires further definition of the xen_root command. xen_root defines the device containing files needed by root.

2.11.2 Checkpoints

Creating a checkpoint is straightforward for a virtual machine, as a checkpoint is a set of files that represent a snapshot of both disk image and memory. The checkpoint is created and all files are transferred back to the $(SPOOL) directory on the machine from which the job was submitted. The submit command to create checkpoints is

  vm_checkpoint = true

Without this command, no checkpoints are created (by default). With the command, a checkpoint is created any time the vm universe jobs is evicted from the machine upon which it is executing. This occurs as a result of the machine configuration indicating that it will no longer execute this job.

vm universe jobs can not use a checkpoint server.

Periodic creation of checkpoints is not supported at this time.

Enabling both networking and checkpointing for a vm universe job can cause networking problems when the job restarts, particularly if the job migrates to a different machine. condor_submit will normally reject such jobs. To enable both, then add the command

  when_to_transfer_output = ON_EXIT_OR_EVICT

Take care with respect to the use of network connections within the virtual machine and their interaction with checkpoints. Open network connections at the time of the checkpoint will likely be lost when the checkpoint is subsequently used to resume execution of the virtual machine. This occurs whether or not the execution resumes on the same machine or a different one within the Condor pool.

2.11.3 Disk Images

2.11.3.1 VMware on Windows and Linux

Following the platform-specific guest OS installation instructions found at http://partnerweb.vmware.com/GOSIG/home.html, creates a VMware disk image.

2.11.3.2 Xen and KVM

While the following web page contains instructions specific to Fedora on how to create a virtual guest image, it should provide a good starting point for other platforms as well.

http://fedoraproject.org/wiki/Virtualization_Quick_Start

2.11.4 Job Completion in the vm Universe

Job completion for a vm universe job occurs when the virtual machine is shut down, and Condor notices (as the result of a periodic check on the state of the virtual machine). This is different from jobs executed under the environment of other universes.

Shut down of a virtual machine occurs from within the virtual machine environment. A script, executed with the proper authorization level, is the likely source of the shut down commands.

Under a Windows 2000, Windows XP, or Vista virtual machine, an administrator issues the command

  shutdown -s -t 01

Under a Linux virtual machine, the root user executes

  /sbin/poweroff

The command /sbin/halt will not completely shut down some Linux distributions, and instead causes the job to hang.

Since the successful completion of the vm universe job requires the successful shut down of the virtual machine, it is good advice to try the shut down procedure outside of Condor, before a vm universe job is submitted.