Next: condor_vacate
Up: 9. Command Reference Manual
Previous: condor_userlog
Contents
Index
Subsections
condor_userprio
Manage user priorities
condor_userprio
[-pool centralmanagerhostname[:portnumber]]
[-all]
[-usage]
[-setprio username value]
[-setfactor username value]
[-setaccum username value]
[-setbegin username value]
[-setlast username value]
[-resetusage username]
[-resetall]
[-delete username]
[-getreslist username]
[-allusers]
[-activefrom month day year]
[-l]
condor_userprio with no arguments, lists the active users (see below) along with their
priorities, in increasing priority order. The -all option can be used to display
more detailed information about each user, which includes the following columns:
- Effective Priority
- The effective priority value of the user, which is used to
calculate the user's share when allocating resources. A lower value means a higher
priority, and the minimum value (highest priority) is 0.5. The effective priority is
calculated by multiplying the real priority by the priority factor.
- Real Priority
- The value of the real priority of the user. This value follows the
user's resource usage.
- Priority Factor
- The system administrator can set this value for each user, thus
controlling a user's effective priority relative to other users. This can be used to
create different classes of users.
- Res Used
- The number of resources currently used (e.g. the number of running jobs
for that user).
- Accumulated Usage
- The accumulated number of resource-hours used by the user since
the usage start time.
- Usage Start Time
- The time since when usage has been recorded for the user. This time
is set when a user job runs for the first time. It is reset to the present time when the
usage for the user is reset (with the -resetusage or -resetall options).
- Last Usage Time
- The most recent time a resource usage has been recorded for the user.
The -usage option displays the username, accumulated usage, usage start time and last usage time
for each user, sorted on accumulated usage.
The -setprio, -setfactor options are used to change a user's real priority and priority factor.
The -setaccum option sets a user's accumulated usage.
The -setbegin, -setlast options are used to change a user's begin usage time and last usage time.
The -setaccum option sets a user's accumulated usage.
The -resetusage and -resetall options are used to reset the accumulated usage for users. The
usage start time is set to the current time when the accumulated usage is reset. These
options require administrator privileges.
By default only users for whom usage was recorded in the last 24 hours or whose priority is
greater than the minimum are listed. The -activefrom and -allusers options can be used
to display users who had some usage since a specified date, or ever. The summary line for
last usage time will show this date.
The -getreslist option is used to display the resources currently used by a user. The
output includes the start time (the time the resource was allocated to the user), and
the match time (how long has the resource been allocated to the user).
Note that when specifying user names on the command line, the name must include the
UID domain (e.g. user@uid-domain - exactly the same way user names are listed by the
userprio command).
The -pool option can be used to contact a different central-manager instead of
the local one (the default).
For security purposes (authentication and authorization),
this command requires an administrator's level of access.
See
section 3.6.1 on page
for further explanation.
- -pool centralmanagerhostname[:portnumber]
- Contact specified centralmanagerhostname with an
optional port number instead of the local central
manager. This can be used to check other pools. NOTE: The
host name (and optionally port) specified refer to the host name
(and port) of the condor_negotiator to query for user
priorities. This is slightly different than most Condor tools
that support -pool, which expect the host name (and optionally
port) of the condor_collector, instead.
- -all
- Display detailed information about each user.
- -usage
- Display usage information for each user.
- -setprio username value
- Set the real priority of the specified user to the specified value.
- -setfactor username value
- Set the priority factor of the specified user to the specified value.
- -setaccum username value
- Set the accumulated usage of the specified user to the specified floating
point value.
- -setbegin username value
- Set the begin usage time of the specified user to the specified value.
- -setlast username value
- Set the last usage time of the specified user to the specified value.
- -resetusage username
- Reset the accumulated usage of the specified user to zero.
- -resetall
- Reset the accumulated usage of all the users to zero.
- -delete username
- Remove the specified username from Condor's accounting.
- -getreslist username
- Display all the resources currently allocated to the specified user.
- -allusers
- Display information for all the users who have some recorded accumulated usage.
- -activefrom month day year
- Display information for users who have some recorded accumulated usage since
the specified date.
- -l
- Show the class-ad which was received from the central-manager in long format.
condor_userprio will exit with a status value of 0 (zero) upon success,
and it will exit with the value 1 (one) upon failure.
Center for High Throughput Computing, University of Wisconsin-Madison
Copyright © 1990-2012 Center for High Throughput Computing,
Computer Sciences Department,
University of Wisconsin-Madison, Madison, WI. All Rights Reserved.
Licensed under the Apache License, Version 2.0.
See the Condor Version 7.6.10 Manual or
http://research.cs.wisc.edu/htcondor/
for
additional notices.
Next: condor_vacate
Up: 9. Command Reference Manual
Previous: condor_userlog
Contents
Index
htcondor-admin@cs.wisc.edu