This is an outdated version of the HTCondor Manual. You can find current documentation at http://htcondor.org/manual.

4.2 HTCondor's Checkpoint Mechanism

A checkpoint is a snapshot of the current state of a program, taken in such a way that the program can be restarted from that state at a later time. Taking checkpoints gives the HTCondor scheduler the freedom to reconsider scheduling decisions through preemptive-resume scheduling. If the scheduler decides to no longer allocate a machine to a job (for example, when the owner of that machine returns), it can take a checkpoint of the job and preempt the job without losing the work the job has already accomplished. The job can be resumed later when the scheduler allocates it a new machine. Additionally, periodic checkpoints provides fault tolerance in HTCondor. Snapshots are taken periodically, and after an interruption in service the program can continue from the most recent snapshot.

HTCondor provides checkpoint services to single process jobs on some Unix platforms. To enable the taking of checkpoints, the user must link the program with the HTCondor system call library (libcondorsyscall.a), using the condor_compile command. This means that the user must have the object files or source code of the program to use HTCondor checkpoints. However, the checkpoint services provided by HTCondor are strictly optional. So, while there are some classes of jobs for which HTCondor does not provide checkpoint services, these jobs may still be submitted to HTCondor to take advantage of HTCondor's resource management functionality. See section 2.4.1 on page  for a description of the classes of jobs for which HTCondor does not provide checkpoint services.

The taking of process checkpoints is implemented in the HTCondor system call library as a signal handler. When HTCondor sends a checkpoint signal to a process linked with this library, the provided signal handler writes the state of the process out to a file or a network socket. This state includes the contents of the process stack and data segments, all shared library code and data mapped into the process's address space, the state of all open files, and any signal handlers and pending signals. On restart, the process reads this state from the file, restoring the stack, shared library and data segments, file state, signal handlers, and pending signals. The checkpoint signal handler then returns to user code, which continues from where it left off when the checkpoint signal arrived.

HTCondor processes for which the taking of checkpoints is enabled take a checkpoint when preempted from a machine. When a suitable replacement execution machine is found of the same architecture and operating system, the process is restored on this new machine using the checkpoint, and computation resumes from where it left off. Jobs that can not take checkpoints are preempted and restarted from the beginning.

HTCondor's taking of periodic checkpoints provides fault tolerance. Pools may be configured with the PERIODIC_CHECKPOINT variable, which controls when and how often jobs which can take and use checkpoints do so periodically. Examples of when are never, and every three hours. When the time to take a periodic checkpoint occurs, the job suspends processing, takes the checkpoint, and immediately continues from where it left off. There is also a condor_ckpt command which allows the user to request that an HTCondor job immediately take a periodic checkpoint.

In all cases, HTCondor jobs continue execution from the most recent complete checkpoint. If service is interrupted while a checkpoint is being taken, causing that checkpoint to fail, the process will restart from the previous checkpoint. HTCondor uses a commit style algorithm for writing checkpoints: a previous checkpoint is deleted only after a new complete checkpoint has been written successfully.

In certain cases, taking a checkpoint may be delayed until a more appropriate time. For example, an HTCondor job will defer a checkpoint request if it is communicating with another process over the network. When the network connection is closed, the checkpoint will be taken.

The HTCondor checkpoint feature can also be used for any Unix process outside of the HTCondor batch environment. Standalone checkpoints are described in section 4.2.1.

HTCondor can produce and use compressed checkpoints. Configuration variables (detailed in section 3.5.10 control whether compression is used. The default is to not compress.

By default, a checkpoint is written to a file on the local disk of the machine where the job was submitted. An HTCondor pool can also be configured with a checkpoint server or servers that serve as a repository for checkpoints, as described in section 3.10 on page . When a host is configured to use a checkpoint server, jobs submitted on that machine write and read checkpoints to and from the server, rather than the local disk of the submitting machine, taking the burden of storing checkpoint files off of the submitting machines and placing it instead on server machines (with disk space dedicated for the purpose of storing checkpoints).

4.2.1 Standalone Checkpoint Mechanism

Using the HTCondor checkpoint library without the remote system call functionality and outside of the HTCondor system is known as the standalone mode checkpoint mechanism.

To prepare a program for taking standalone checkpoints, use the condor_compile utility as for a standard HTCondor job, but do not use condor_submit. Run the program from the command line. The checkpoint library will print a message to let you know that taking checkpoints is enabled and to inform you of the default name for the checkpoint image. The message is of the form:

HTCondor: Notice: Will checkpoint to program_name.ckpt
HTCondor: Notice: Remote system calls disabled.

Platforms that use address space randomization will need a modified invocation of the program, as described in section 8.1.1 on page . The invocation disables the address space randomization.

To force the program to write a checkpoint image and stop, send it the SIGTSTP signal or press control-Z. To force the program to write a checkpoint image and continue executing, send it the SIGUSR2 signal.

To restart a program using a checkpoint, invoke the program with the command line argument -_condor_restart, followed by the name of the checkpoint image file. As an example, if the program is called P1 and the checkpoint is called P1.ckpt, use

P1 -_condor_restart P1.ckpt

Again, platforms that implement address space randomization will need a modified invocation, as described in section 8.1.1.

By default, the program will restart in the same directory in which it originally ran, and the program will fail if it can not change to that absolute path. To suppress this behavior, also pass the -_condor_relocatable argument to the program. Not all programs will continue to work. Doing this may simplify moving standalone checkpoints between machines. Continuing the example given above, the command would be

P1 -_condor_restart P1.ckpt -_condor_relocatable

4.2.2 Checkpoint Safety

Some programs have fundamental limitations that make them unsafe for taking checkpoints. For example, a program that both reads and writes a single file may enter an unexpected state. Here is an example of the ordered events that exhibit this issue.

1. Record a checkpoint image.
2. Read data from a file.
3. Write data to the same file.
4. Execution failure, so roll back to step 2.

In this example, the program would re-read data from the file, but instead of finding the original data, would see data created in the future, and yield unexpected results.

To prevent this sort of accident, HTCondor displays a warning if a file is used for both reading and writing. You can ignore or disable these warnings if you choose as described in section 4.2.3, but please understand that your program may compute incorrect results.

4.2.3 Checkpoint Warnings

HTCondor displays warning messages upon encountering unexpected behaviors in the program. For example, if file x is opened for reading and writing, this message will be displayed:

HTCondor: Warning: READWRITE: File '/tmp/x' used for both reading and writing.

Control how these messages are displayed with the -_condor_warning command line argument. This argument accepts a warning category and a mode. The category describes a certain class of messages, such as READWRITE or ALL. The mode describes what to do with the category. It may be ON, OFF, or ONCE. If a category is ON, it is always displayed. If a category is OFF, it is never displayed. If a category is ONCE, it is displayed only once. To show all the available categories and modes, use -_condor_warning with no arguments.

For example, the additional command line argument to limit read/write warnings to one instance is

-_condor_warning READWRITE ONCE

To turn all ordinary notices off:

-_condor_warning NOTICE OFF

The same effect can be accomplished within a program by using the function _condor_warning_config().

4.2.4 Checkpoint Library Interface

A program need not be rewritten to take advantage of checkpoints. However, the checkpoint library provides several C entry points that allow for a program to control its own checkpoint behavior. These functions are provided.

• void init_image_with_file_name( char *ckpt_file_name )
  This function explicitly sets a file name to use when producing or using a checkpoint. ckpt() or ckpt_and_exit() must be called to produce the checkpoint, and restart() must be called to perform the actual restart.

• void init_image_with_file_descriptor( int fd )
  This function explicitly sets a file descriptor to use when producing or using a checkpoint. ckpt() or ckpt_and_exit() must be called to produce the checkpoint, and restart() must be called to perform the actual restart.

• void ckpt()
  This function causes a checkpoint image to be written to disk. The program will continue to execute. This is identical to sending the program a SIGUSR2 signal.

• void ckpt_and_exit()
  This function causes a checkpoint image to be written to disk. The program will then exit. This is identical to sending the program a SIGTSTP signal.

• void restart()
  This function causes the program to read the checkpoint image and to resume execution of the program from the point where the checkpoint was taken. This function does not return.

• void _condor_ckpt_disable()
  This function temporarily disables the taking of checkpoints. This can be handy if the program does something that is not checkpoint-safe. For example, if a program must not be interrupted while accessing a special file, call _condor_ckpt_disable(), access the file, and then call _condor_ckpt_enable(). Some program actions, such as opening a socket or a pipe, implicitly cause the taking of checkpoints to be disabled.

• void _condor_ckpt_enable()
  This function re-enables the taking of checkpoints after a call to _condor_ckpt_disable(). If a checkpoint signal arrived while the taking of checkpoints was disabled, the checkpoint will be taken when this function is called. Disabling and enabling the taking of checkpoints must occur in matched pairs. _condor_ckpt_enable() must be called once for every time that _condor_ckpt_disable() is called.

• int _condor_warning_config( const char *kind, const char *mode )
  This function controls what warnings are displayed by HTCondor. The kind and mode arguments are the same as for the -_condor_warning option described in section 4.2.3. This function returns true if the arguments are understood and accepted. Otherwise, it returns false.

• extern int condor_compress_ckpt
  Setting this variable to 1 (one) causes checkpoint images to be compressed. Setting it to 0 (zero) disables compression.