Next: condor_vacate
Up: 11. Command Reference Manual
Previous: condor_userlog
Contents
Index
Subsections
condor_userprio
Manage user priorities
condor_userprio
[-pool centralmanagerhostname[:portnumber]]
[Edit option] 
[Display options]
condor_userprio either modifies priority-related information
or displays priority-related information.
Displayed information comes from the accountant log,
where the condor_negotiator daemon stores historical usage information
in the file at $(SPOOL)/Accountantnew.log.
Which fields are displayed changes based on command line arguments.
condor_userprio with no arguments,
lists the active users along with their priorities,
in increasing priority order.
The -all option can be used to display
more detailed information about each user,
resulting in a rather wide display,
and includes the following columns:
- Effective Priority
- The effective priority value of the user,
which is used to calculate the user's share when allocating resources.
A lower value means a higher priority,
and the minimum value (highest priority) is 0.5.
The effective priority is
calculated by multiplying the real priority by the priority factor.
- Real Priority
- The value of the real priority of the user.
This value follows the user's resource usage.
- Priority Factor
- The system administrator can set this value
for each user,
thus controlling a user's effective priority relative to other users.
This can be used to create different classes of users.
- Res Used
- The number of resources currently used.
- Accumulated Usage
- The accumulated number of resource-hours
used by the user since the usage start time.
- Usage Start Time
- The time since when usage has been recorded
for the user.
This time is set when a user job runs for the first time.
It is reset to the present time when the
usage for the user is reset.
- Last Usage Time
- The most recent time a resource usage has been recorded
for the user.
By default only users for whom usage was recorded in the last 24 hours,
or whose priority is greater than the minimum are listed.
The -pool option can be used to contact a different central manager
than the local one (the default).
For security purposes of authentication and authorization,
specifying an Edit Option requires the ADMINISTRATOR level of access.
- -pool centralmanagerhostname[:portnumber]
- Contact the specified centralmanagerhostname with an
optional port number, instead of the local central manager.
This can be used to check other pools.
NOTE: The host name (and optional port) specified refer to the host name
(and port) of the condor_negotiator to query for user priorities.
This is slightly different than most HTCondor tools
that support a -pool option,
and instead expect the host name (and port) of the condor_collector.
- -delete username
- (Edit option) Remove the specified username from HTCondor's accounting.
- -resetall
- (Edit option) Reset the accumulated usage of all the users to zero.
- -resetusage username
- (Edit option) Reset the accumulated usage of the user specified by
username to zero.
- -setaccum username value
- (Edit option) Set the accumulated usage of the user specified by
username to the specified floating point value.
- -setbegin username value
- (Edit option) Set the begin usage time of the user specified by
username to the specified value.
- -setfactor username value
- (Edit option) Set the priority factor of the user specified by
username to the specified value.
- -setlast username value
- (Edit option) Set the last usage time of the user specified by
username to the specified value.
- -setprio username value
- (Edit option) Set the real priority of the user specified by
username to the specified value.
- -activefrom month day year
- (Display option) Display information for users who have
some recorded accumulated usage since the specified date.
- -all
- (Display option) Display all available fields about each group or user.
- -allusers
- (Display option) Display information for all the users
who have some recorded accumulated usage.
- -flat
- (Display option) Display information such that users within hierarchical
groups are not listed with their group.
- -getreslist username
- (Display option) Display all the resources currently allocated to the
user specified by username.
- -grouporder
- (Display option) Display submitter information with accounting group
entries at the top of the list,
and in breadth-first order within the group hierarchy tree.
- -grouprollup
- (Display option) For hierarchical groups,
the display shows sums as computed for groups,
and these sums include sub groups.
- -hierarchical
- (Display option) Display information such that users within hierarchical
groups are listed with their group.
- -long
- (Display option) A verbose output which displays entire ClassAds.
- -most
- (Display option) Display fields considered to be the most useful.
This is the default set of fields displayed.
- -priority
- (Display option) Display fields with user priority information.
- -quotas
- (Display option) Display fields relevant to hierarchical group quotas.
- -usage
- (Display option) Display usage information for each group or user.
Example 1 Since the output varies due to command line arguments,
here is an example of the default output for a pool that does not use
Hierarchical Group Quotas.
This default output is the same as given with the -most Display option.
Last Priority Update: 1/19 13:14
Effective Priority Res Total Usage Time Since
User Name Priority Factor In Use (wghted-hrs) Last Usage
---------------------- ------------ --------- ------ ------------ ----------
www-cndr@cs.wisc.edu 0.56 1.00 0 591998.44 0+16:30
joey@cs.wisc.edu 1.00 1.00 1 990.15 <now>
suzy@cs.wisc.edu 1.53 1.00 0 261.78 0+09:31
leon@cs.wisc.edu 1.63 1.00 2 12597.82 <now>
raj@cs.wisc.edu 3.34 1.00 0 8049.48 0+01:39
jose@cs.wisc.edu 3.62 1.00 4 58137.63 <now>
betsy@cs.wisc.edu 13.47 1.00 0 1475.31 0+22:46
petra@cs.wisc.edu 266.02 500.00 1 288082.03 <now>
carmen@cs.wisc.edu 329.87 10.00 634 2685305.25 <now>
carlos@cs.wisc.edu 687.36 10.00 0 76555.13 0+14:31
ali@proj1.wisc.edu 5000.00 10000.00 0 1315.56 0+03:33
apu@nnland.edu 5000.00 10000.00 0 482.63 0+09:56
pop@proj1.wisc.edu 26688.11 10000.00 1 49560.88 <now>
franz@cs.wisc.edu 29352.06 500.00 109 600277.88 <now>
martha@nnland.edu 58030.94 10000.00 0 48212.79 0+12:32
izzi@nnland.edu 62106.40 10000.00 0 6569.75 0+02:26
marta@cs.wisc.edu 62577.84 500.00 29 193706.30 <now>
kris@proj1.wisc.edu 100597.94 10000.00 0 20814.24 0+04:26
boss@proj1.wisc.edu 318229.25 10000.00 3 324680.47 <now>
---------------------- ------------ --------- ------ ------------ ----------
Number of users: 19 784 4969073.00 0+23:59
Example 2 This is an example of the default output for a pool
that uses hierarchical groups, and the groups accept surplus.
This leads to a very wide display.
% condor_userprio -pool crane.cs.wisc.edu -allusers
Last Priority Update: 1/19 13:18
Group Config Use Effective Priority Res Total Usage Time Since
User Name Quota Surplus Priority Factor In Use (wghted-hrs) Last Usage
------------------------------------ --------- ------- ------------ --------- ------ ------------ ----------
<none> 0.00 yes 1.00 0 6.78 9+03:52
johnsm@crane.cs.wisc.edu 0.50 1.00 0 6.62 9+19:42
John.Smith@crane.cs.wisc.edu 0.50 1.00 0 0.02 9+03:52
Sedge@crane.cs.wisc.edu 0.50 1.00 0 0.05 13+03:03
Duck@crane.cs.wisc.edu 0.50 1.00 0 0.02 31+00:28
other@crane.cs.wisc.edu 0.50 1.00 0 0.04 16+03:42
Duck 2.00 no 1.00 0 0.02 13+02:57
goose@crane.cs.wisc.edu 0.50 1.00 0 0.02 13+02:57
Sedge 4.00 no 1.00 0 0.17 9+03:07
johnsm@crane.cs.wisc.edu 0.50 1.00 0 0.13 9+03:08
Half@crane.cs.wisc.edu 0.50 1.00 0 0.02 31+00:02
John.Smith@crane.cs.wisc.edu 0.50 1.00 0 0.05 9+03:07
other@crane.cs.wisc.edu 0.50 1.00 0 0.01 28+19:34
------------------------------------ --------- ------- ------------ --------- ------ ------------ ----------
Number of users: 10 ByQuota 0 6.97
condor_userprio will exit with a status value of 0 (zero) upon success,
and it will exit with the value 1 (one) upon failure.
Center for High Throughput Computing, University of Wisconsin-Madison
Copyright © 1990-2013 Center for High Throughput Computing,
Computer Sciences Department,
University of Wisconsin-Madison, Madison, WI. All Rights Reserved.
Licensed under the Apache License, Version 2.0.
Next: condor_vacate
Up: 11. Command Reference Manual
Previous: condor_userlog
Contents
Index