This is an outdated version of the HTCondor Manual. You can find current documentation at http://htcondor.org/manual.
next up previous contents index
Next: 7. Platform-Specific Information Up: 6. Application Programming Interfaces Previous: 6.6 The HTCondor Perl   Contents   Index

Subsections


6.7 Python Bindings

The Python module provides bindings to the client-side APIs for HTCondor and the ClassAd language.

These Python bindings depend on loading the HTCondor shared libraries; this means the same code is used here as the HTCondor client tools. It is more efficient in terms of memory and CPU to utilize these bindings than to parse the output of the HTCondor client tools when writing applications in Python.


6.7.1 htcondor Module

The htcondor module provides a client interface to the various HTCondor daemons. It tries to provide functionality similar to the HTCondor command line tools.

htcondor module functions:

platform( )

Returns the platform of HTCondor this module is running on.

version( )

Returns the version of HTCondor this module is linked against.

reload_config( )

Reload the HTCondor configuration from disk.

send_command( ad, (DaemonCommands)dc, (str)target = None)

Send a command to an HTCondor daemon specified by a location ClassAd.

ad is a ClassAd specifying the location of the daemon; typically, found by using Collector.locate(...).

dc is a command type; must be a member of the enum DaemonCommands.

target is an optional parameter, representing an additional command to send to a daemon. Some commands require additional arguments; for example, sending DaemonOff to a condor_master requires one to specify which subsystem to turn off.

read_events( file_obj, is_xml = True )

Read and parse an HTCondor event log file. Returns a Python iterator of ClassAds.

Parameter file_obj is a file object corresponding to an HTCondor event log.

The optional parameter is_xml specifies whether the event log is XML-formatted.

send_alive( ad, pid, timeout )

Send a keep alive message to an HTCondor daemon.

Parameter ad is a ClassAd specifying the location of the daemon. This ClassAd is typically found by using Collector.locate(...).

Parameter pid is the process identifier for the keep alive. The default value of None uses the value from os.getpid().

Parameter timeout is the number of seconds that this keep alive is valid. If a new keep alive is not received by the condor_master in time, then the process will be terminated. The default value is controlled by configuration variable NOT_RESPONDING_TIMEOUT.

set_subsystem( name, type = Auto )

Set the subsystem name for the object.

Parameter name is the subsystem name.

Parameter type is the HTCondor daemon type, taken from the SubsystemType enum. The default value of Auto infers the type from the name parameter.

lock( file_obj, lock_type )

Take a lock on a file object using the HTCondor locking protocol, which is distinct from typical POSIX locks. Returns a context manager object; the lock is released as this context manager object is destroyed.

Parameter file_obj is a file object corresponding to the file which should be locked.

Parameter lock_type specifies the string "ReadLock" if the lock should be for reads or "WriteLock" if the lock should be for writes.

enable_debug( )

Enable debugging output from HTCondor, where output is sent to stderr. The logging level is controlled by TOOL_DEBUG.

enable_log( )

Enable debugging output from HTCondor, where output is sent to a file. The log level is controlled by TOOL_DEBUG, and the file used is controlled by TOOL_LOG.

log( level, msg ) Log a message to the HTCondor logging subsystem.

Parameter level is the Log category and formatting indicator. Use the LogLevel enum to get list of attributes that may be OR'd together.

Parameter msg is a String message to log.

poll( active_queries )

Wait on the results of multiple query iteratories. Param active_queries is a list of query iterators as returned by xquery().

This function returns an iterator which yields the next ready query iterator. The returned iterator stops when all results have been consumed for all iterators.

The iterator returned by xquery has a method named nextAdsNonBlocking which returns a list of all ads available without blocking.

The module object, param, is a dictionary-like object providing access to the configuration variables in the current HTCondor configuration.

The Schedd class:

__init__( classad )

Create an instance of the Schedd class.

Optional parameter classad describes the location of the remote condor_schedd daemon. If the parameter is omitted, the local condor_schedd daemon is used.

transaction( flags = 0, continue_txn = False )

Start a transaction with the condor_schedd. Returns a transaction context manager. Starting a new transaction while one is ongoing is an error.

The optional parameter flags defaults to 0. Transaction flags are from the the enum htcondor.TransactionFlags, and the three flags are NonDurable, SetDirty, or ShouldLog. NonDurable is used for performance, as it eliminates extra fsync() calls. If the condor_schedd crashes before the transaction is written to disk, the transaction will be retried on restart of the condor_schedd. SetDirty marks the changed ClassAds as dirty, so an update notification is sent to the condor_shadow and the condor_gridmanager. ShouldLog causes changes to the job queue to be logged in the job event log file.

The optional parameter continue_txn defaults to false; set the value to true to extend an ongoing transaction.

act( (JobAction)action, (object)job_spec )

Change status of job(s) in the condor_schedd daemon. The integer return value is a ClassAd object describing the number of jobs changed.

Parameter action is the action to perform; must be of the enum JobAction.

Parameter job_spec is the job specification. It can either be a list of job IDs or a string specifying a constraint to match jobs.

edit( (object)job_spec, (str)attr, (object)value )

Edit one or more jobs in the queue.

Parameter job_spec is either a list of jobs, with each given as ClusterId.ProcId or a string containing a constraint to match jobs against.

Parameter attr is the attribute name of the attribute to edit.

Parameter value is the new value of the job attribute. It should be a string, which will be converted to a ClassAd expression, or an ExprTree object.

query( constraint = true, attr_list = [] )

Query the condor_schedd daemon for jobs. Returns a list of ClassAds representing the matching jobs, containing at least the requested attributes requested by the second parameter.

The optional parameter constraint provides a constraint for filtering out jobs. It defaults to True.

Parameter attr_list is a list of attributes for the condor_schedd daemon to project along. It defaults to having the condor_schedd daemon return all attributes.

xquery( constraint = true, attr_list = [], limit, opts, name )

Query the condor_schedd daemon for jobs. Returns an iterator of ClassAds representing the matching jobs containing at least the list of attributes requested by the second parameter.

The optional parameter constraint provides a constraint for filtering out jobs. It defaults to True.

Parameter attr_list is a list of attributes for the condor_schedd daemon to project along. It defaults to having the condor_schedd daemon return all attributes.

Parameter limit is the maximum number of results this query will return.

Parameter opts specifies any additional query options. Currently, the only non-default option is QueryOpts.AutoCluster, which returns autoclusters in the schedd, not jobs.

Parameter name provides a tag name for the returned query iterator. This string will always be returned from the tag() method of the returned iterator. The default value is the condor_schedd's name. This tag is useful to identify different queries when using the poll() module function.

history( (object) requirements, (list) projection, (int) match )

Request history records from the condor_schedd daemon. Returns an iterator to a set of ClassAds representing completed jobs.

Parameter requirements is either an ExprTree or a string that can be parsed as an expression. The expression represents the requirements that all returned jobs should match.

Parameter projection is a list of all the ClassAd attributes that are to be included for each job. The empty list causes all attributes to be included.

Parameter match is an integer cap on the number of jobs to include.

submit( ad, count = 1, spool = false, ad_results = None )

Submit one or more jobs to the condor_schedd daemon. Returns the newly created cluster ID.

This method requires the invoker to provide a ClassAd for the new job cluster; such a ClassAd contains attributes with different names than the commands in a submit description file. As an example, the stdout file is referred to as output in the submit description file, but Out in the ClassAd. To generate an example ClassAd, take a sample submit description file and invoke

condor_submit -dump <filename> [cmdfile]

Then, load the resulting contents of <filename> into Python.

Parameter ad is the ClassAd describing the job cluster.

Parameter count is the number of jobs to submit to the cluster. Defaults to 1.

Parameter spool inserts the necessary attributes into the job for it to have the input files spooled to a remote condor_schedd daemon. This parameter is necessary for jobs submitted to a remote condor_schedd.

Parameter ad_results, if set to a list, will contain the job ClassAds resulting from the job submission. These are useful for interacting with the job spool at a later time.

submitMany( cluster_ad, proc_ads, spool = false, ad_results = None )

Submit multiple jobs to the condor_schedd daemon, possibly including several distinct processes. Returns the newly created cluster ID.

This method requires the invoker to provide a ClassAd, cluster_ad for the new job cluster; this is the same format as in the submit() method.

The proc_ads parameter is a list of 2-tuples; each tuple has the format of (proc_ad, count). For each list entry, this will result in count jobs being submitted inheriting from both cluster_ad and proc_ad.

Parameter spool inserts the necessary attributes into the job for it to have the input files spooled to a remote condor_schedd daemon. This parameter is necessary for jobs submitted to a remote condor_schedd.

Parameter ad_results, if set to a list, will contain the job ClassAds resulting from the job submission. These are useful for interacting with the job spool at a later time.

spool( ad_list )

Spools the files specified in a list of job ClassAds to the condor_schedd. Throws a RuntimeError exception if there are any errors.

Parameter ad_list is a list of ClassAds containing job descriptions; typically, this is the list filled by the ad_results argument of the submit method call.

retrieve( job_spec )

Retrieve the output sandbox from one or more jobs.

Parameter job_spec is an expression string matching the list of job output sandboxes to retrieve.

refreshGSIProxy(cluster, proc, filename, lifetime)

Refresh the GSI proxy of a job with job identifier given by parameters cluster and proc. This will refresh the remote proxy with the contents of the file identified by parameter filename.

Parameter lifetime indicates the desired lifetime (in seconds) of the delegated proxy. A value of 0 specifies to not shorten the proxy lifetime. A value of -1 specifies to use the value of configuration variable DELEGATE_JOB_GSI_CREDENTIALS_LIFETIME. Note that, depending on the lifetime of the proxy in filename, the resulting lifetime may be shorter than the desired lifetime.

negotiate( (str)accounting_name )

Begin a negotiation cycle with the remote schedd. The accounting_name parameter determines which user we will start negotiating with.

The returned object, of type ScheddNegotiate is iterable; its iterator will yield resource request ClassAds from the schedd. Each resource request represents a set of jobs that are next in queue for the schedd for this user.

The ScheddNegotiate additionally serves as a context manager, automatically destroying the negotiation session when the context is left.

Finally, ScheddNegotiate has a sendClaim method for sending claims back to the remote schedd based on a given resource request.

The Submit class:

__init__( (dict)input = None )

Create an instance of the Submit class.

Optional parameter input is a Python dictionary containing submit file key = value pairs. If omitted, the submit class is initially empty.

expand( (str)attr )

Expand all macros for the given attribute.

Parameter attr is the name of the relevant attribute.

Returns a string containing the value of the given attribute with all macros expanded.

queue( (object)txn, (int)count = 1, (object)ad_results = None )

Submit the current object to a remote queue. Parameter txn is an active transaction object (see Schedd.transaction()).

Optional parameter count is the number of procs to create (defaults to 1 if not specified).

Optional parameter ad_results is an object to receive the ClassAd resulting from this submit.

Returns the ClusterID of the submitted job(s).

Throws a RuntimeError if the submission fails.

get( (str)attr, (str)default = None )

Gets the value of the specified attribute.

Parameter attr is the name of the relevant attribute.

Optional parameter default is a default value to be returned if the attribute is not defined.

Returns a string containing the value of the attribute.

setdefault( (str)attr, (str)default)

Set a default value for an attribute.

Parameter attr is the name of the relevant attribute.

Parameter default is the value to which to set the given attribute if that attribute has not already been set.

Returns a string containing the value of the attribute.

update( (object)submit )

Copy the contents of a given Submit object into the current object.

Parameter submit is the Submit object to copy.

The Collector class:

__init__( pool = None )

Create an instance of the Collector class.

Optional parameter pool is a string with host:port pair specified or a list of pairs. If omitted, the value of configuration variable COLLECTOR_HOST is used.

locate( (DaemonTypes)daemon_type, (str)name )

Query the condor_collector for a particular daemon. Returns the ClassAd of the requested daemon.

Parameter daemon_type is the type of daemon; must be of the enum DaemonTypes.

Optional parameter name is the name of daemon to locate. If not specified, it searches for the local daemon.

locateAll( (DaemonTypes)daemon_type )

Query the condor_collector daemon for all ClassAds of a particular type. Returns a list of matching ClassAds.

Parameter daemon_type is the type of daemon; must be of the enum DaemonTypes.

query( (AdTypes)ad_type, constraint=True, attrs=[], (str)statistics = '' )

Query the contents of a condor_collector daemon. Returns a list of ClassAds that match the constraint parameter.

Optional parameter ad_type is the type of ClassAd to return, where the types are from the enum AdTypes. If not specified, the type will be ANY_AD.

Optional parameter constraint is a constraint for the ClassAd query. It defaults to True.

Optional parameter attrs is a list of attributes. If specified, the returned ClassAds will be projected along these attributes.

Optional parameter statistics is a list of statistics attributes to include, if they exist for the specified daemon.

advertise( ad_list, command=UPDATE_AD_GENERIC, use_tcp = True )

Advertise a list of ClassAds into the condor_collector.

Parameter ad_list is the list of ClassAds to advertise.

Optional parameter command is a command for the condor_collector. It defaults to UPDATE_AD_GENERIC. Other commands, such as UPDATE_STARTD_AD, may require reduced authorization levels.

Optional parameter use_tcp causes updates to be sent via TCP. Defaults to True.

directQuery( (Collector)arg1, (DaemonTypes)daemon_type, (str)name = '', (list)projection = [], (str)statistics = '' )

Query the specified daemon directly, instead of using the ClassAd from the condor_collector daemon. Returns the ClassAd of the specified daemon, after obtaining it from the daemon.

Parameter arg1 is the condor_collector that will identify where to find the specified daemon.

Parameter daemon_type specified a daemon with an enum from DaemonTypes.

Optional parameter name specifies the daemon's name. If not specified, the local daemon is used.

Optional parameter projection is a list of attributes requested, to obtain only a subset of the attributes from the ClassAd.

Optional parameter statistics is a list of statistics attributes to include, if they exist for the specified daemon.

The Negotiator class:

__init__( (ClassAd)ad = None )

Create an instance of the Negotiator class.

Optional parameter ad is a ClassAd containing the location of the condor_negotiator daemon. If omitted, uses the local pool.

deleteUser( (str)user )

Delete a user from the accounting.

user is a fully-qualified user name, "USER@DOMAIN".

getPriorities( [(bool)rollup = False ] )

Retrieve the pool accounting information. Returns a list of accounting ClassAds.

Optional parameter rollup identifies if accounting information, as applied to hierarchical group quotas, should be summed for groups and subgroups (True) or not (False, the default).

getResourceUsage( (str)user )

Get the resource usage for a specified user. Returns a list of ClassAd attributes.

Parameter user is a fully-qualified user name, "USER@DOMAIN".

resetAllUsage( )

Reset all usage accounting.

resetUsage( (str)user )

Reset all usage accounting of the specified user.

Parameter user is a fully-qualified user name, "USER@DOMAIN"; resets the usage of only this user.

setBeginUsage( (str)user, (time_t)value )

Initialize the time that a user begins using the pool.

Parameter user is a fully-qualified user name, "USER@DOMAIN". Parameter value is the time of initial usage.

setLastUsage( (str)user, (time_t)value )

Set the time that a user last began using the pool.

Parameter user is a fully-qualified user name, "USER@DOMAIN". Parameter value is the time of last usage.

setFactor( (str)user, (float)factor )

Set the priority factor of a specified user.

Parameter user is a fully-qualified user name, "USER@DOMAIN". Parameter factor is the priority factor to be set for the user; must be greater than or equal to 1.0.

setPriority( (str)user, (float)prio )

Set the real priority of a specified user.

Parameter user is a fully-qualified user name, "USER@DOMAIN". Parameter prio is the priority to be set for the user; must be greater than 0.0.

setUsage( (str)user, (float)usage )

Set the accumulated usage of a specified user.

Parameter user is a fully-qualified user name, "USER@DOMAIN". Parameter usage is the usage to be set for the user.

The Startd class:

__init__( (ClassAd)ad = None )

Create an instance of the Startd class.

Optional parameter ad is a ClassAd describing the claim (optional) and the startd location. If omitted, the local startd is assumed.

drainJobs( (int)how_fast = Graceful, (bool)resume_on_completion = false, (expr)check_expr = true )

Begin draining jobs from the startd.

Optional parameter drain_type is how fast to drain the jobs (from the DrainTypes enum: Fast, Graceful or Quick) (defaults to Graceful if not specified).

Parameter resume_on_completion is True if the startd should start accepting jobs again once draining is complete, False if it should remain in the drained state (defaults to False if not specified).

Optional parameter check_expr is an expression that must be True for all slots for draining to begin (defaults to True if not specified).

Returns a (string) request_id that can be used to cancel draining.

cancelDrainJobs( (object)request_id = None )

Cancel a draining request.

Optional parameter request_id specifies a draining request to cancel; if not specified, all draining requests for this startd are canceled.

The SecMan class accesses the internal security object. This class allows access to the security layer of HTCondor.

Currently, this is limited to resetting security sessions and doing test authorizations against remote daemons.

If a security session becomes invalid, for example, because the remote daemon restarts, reuses the same port, and the client continues to use the session, then all future commands will fail with strange connection errors. This is the only mechanism to invalidate in-memory sessions.

__init__( )

Create a SecMan object.

invalidateAllSessions( )

Invalidate all security sessions. Any future connections to a daemon will cause a new security session to be created.

ping ( (ClassAd)ad, (str)command )

or

ping ( (string)sinful, (str)command )

Perform a test authorization against a remote daemon for a given command.

Returns the ClassAd of the security session.

Parameter ad is the ClassAd of the daemon as returned by Collector.locate; alternately, the sinful string can be given directly as the first parameter.

Optional parameter command is the DaemonCore command to try; if not given, DC_NOP will be used.

The Param class provides a dictionary-like interface to the current configuration.

The Param class:

__getitem__( (str)attr )

Returns the configuration for variable attr as an object.

__setitem__( (str)attr, (str)value )

Sets the configuration variable attr to the value.

__contains__( (str)attr )

Determines whether the configuration contains a setting for configuration variable attr.

Returns true if the configuration does contain a setting for attr, and it returns false otherwise.

Parameter attr is the name of the configuration variable.

__iter__( )

Description not yet written.

__len__( )

Returns the number of items in the configuration.

setdefault( (str)attr, (str)value )

Behaves like the corresponding Python dictionary method. If attr is not set in the configuration, it sets attr to value in the configuration. Returns the value as an object.

get( )

get description not yet written.

keys( )

Return a list of configuration variable names that are defined in the configuration files.

items( )

Returns an iterator of tuples. Each item returned by the iterator is a tuple representing a pair (attribute,value) in the configuration.

update( source )

Behaves like the corresponding Python dictionary method. Updates the current configuration to match the one in object source.

The RemoteParam class provides a dictionary-like interface to the configuration of daemons.

The RemoteParam class:

__getitem__( (str)attr )

Returns the configuration for variable attr as an object.

__setitem__( (str)attr, (str)value )

Sets the configuration variable attr to the value.

__contains__( (str)attr )

Determines whether the configuration contains a setting for configuration variable attr.

Returns true if the configuration does contain a setting for attr, and it returns false otherwise.

Parameter attr is the name of the configuration variable.

__iter__( )

Description not yet written.

__len__( )

Returns the number of items in the configuration.

__delitem__( (str)attr )

If the configuration variable specified by attr is in the configuration, set its value to the null string.

Parameter attr is the name of the configuration variable to change.

setdefault( (str)attr, (str)value )

Behaves like the corresponding Python dictionary method. If attr is not set in the configuration, it sets attr to value in the configuration. Returns the value as an object.

get( )

get description not yet written.

keys( )

Return a list of configuration variable names that are defined for the daemon.

items( )

Returns an iterator of tuples. Each item returned by the iterator is a tuple representing a pair (attribute,value) in the configuration.

update( source )

Behaves like the corresponding Python dictionary method. Updates the current configuration to match the one in object source.

refresh( )

Rebuilds the dictionary corresponding to the current configuration of the daemon.

The Claim class provides access to HTCondor's Compute-On-Demand facilities.

The Claim class:

__init__( classad )

Create a Claim object. The classad argument provides a ClassAd describing the startd to claim.

requestCOD( constraint, lease_duration )

Request a claim from the condor_startd represented by this object.

The constraint specifies which slot in the startd to claim (defaults to 'true', which will result in the first slot becoming claimed).

The lease_duration indicates how long the claim should be valid for.

On success, the Claim object will represent a valid claim on the remote startd.

release( (VacateTypes)vacate_type )

Release a condor_startd from this claim and shut down any running job.

The vacate_type argument indicates the type of vacate to perform (Fast or Graceful); must be from VacateTypes enum.

activate( (ClassAd)ad )

Activate a claim using a given job ad.

The ad must describe a job to run.

suspend()

Suspend an activated claim.

renew()

Renew the lease on an existing claim.

resume()

Resume a temporarily suspended claim.

deactivate() Deactivate a claim; shuts down the currently-running job, but holds onto the claim for future use.

delegateGSIProxy() Send an x509 proxy credential to an activated claim.

Module enums:

AdTypes

A list of types used as values for the MyType ClassAd attribute. These types are only used by the HTCondor system, not the ClassAd language. Typically, these specify different kinds of daemons.

DaemonCommands

A list of commands which can be sent to a remote daemon.

DaemonTypes

A list of types of known HTCondor daemons.

JobAction

A list of actions that can be performed on a job in a condor_schedd.

SubsystemType

Distinguishes subsystems within HTCondor. Values may be Master, Collector, Negotiator, Schedd, Shadow, Startd, Starter, GAHP, Dagman, SharedPort, Daemon, Tool, Submit, or Job.

LogLevel

The level at which events are logged. Values may be Always, Error, Status, Job, Machine, Config, Protocol, Priv, DaemonCore, Security, Network, Hostname, Audit, Terse, Verbose, FullDebug, SubSecond, Timestamp, PID, or NoHeader.


6.7.2 Sample Code using the htcondor Python Module

This sample code illustrates interactions with the htcondor Python Module.

$ python
Python 2.6.6 (r266:84292, Jun 18 2012, 09:57:52) 
[GCC 4.4.6 20110731 (Red Hat 4.4.6-3)] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import htcondor
>>> import classad
>>> coll = htcondor.Collector("red-condor.unl.edu")
>>> results = coll.query(htcondor.AdTypes.Startd, "true", ["Name"])
>>> len(results)
3812
>>> results[0]
[ Name = "slot1@red-d20n35"; MyType = "Machine"; TargetType = "Job"; CurrentTime = time() ]
>>> scheddAd = coll.locate(htcondor.DaemonTypes.Schedd, "red-gw1.unl.edu")
>>> scheddAd["ScheddIpAddr"]
'<129.93.239.132:53020>'
>>> schedd = htcondor.Schedd(scheddAd)
>>> results = schedd.query('Owner =?= "cmsprod088"', ["ClusterId", "ProcId"])
>>> len(results)
63
>>> results[0]
[ MyType = "Job"; TargetType = "Machine"; ServerTime = 1356722353; ClusterId = 674143; ProcId = 0; CurrentTime = time() ]
>>> htcondor.param["COLLECTOR_HOST"]
'hcc-briantest.unl.edu'
>>> schedd = htcondor.Schedd() # Defaults to the local schedd.
>>> results = schedd.query()
>>> results[0]["RequestMemory"]
ifthenelse(MemoryUsage isnt undefined,MemoryUsage,( ImageSize + 1023 ) / 1024)
>>> results[0]["RequestMemory"].eval()
1L
>>> ad=classad.parse(open("test.submit.ad"))
>>> print schedd.submit(ad, 2) # Submits two jobs in the cluster; edit test.submit.ad to preference.
110
>>> print schedd.act(htcondor.JobAction.Remove, ["111.0", "110.0"])'
    [
        TotalNotFound = 0; 
        TotalPermissionDenied = 0; 
        TotalAlreadyDone = 0; 
        TotalJobAds = 2; 
        TotalSuccess = 2; 
        TotalChangedAds = 1; 
        TotalBadStatus = 0; 
        TotalError = 0
    ]
>>> print schedd.act(htcondor.JobAction.Hold, "Owner =?= \"bbockelm\"")'
    [
        TotalNotFound = 0; 
        TotalPermissionDenied = 0; 
        TotalAlreadyDone = 0; 
        TotalJobAds = 2; 
        TotalSuccess = 2; 
        TotalChangedAds = 1; 
        TotalBadStatus = 0; 
        TotalError = 0
    ]
>>> schedd.edit('Owner =?= "bbockelm"', "Foo", classad.ExprTree('"baz"'))
>>> schedd.edit(["110.0"], "Foo", '"bar"')
>>> coll = htcondor.Collector()
>>> master_ad = coll.locate(htcondor.DaemonTypes.Master)
>>> htcondor.send_command(master_ad, htcondor.DaemonCommands.Reconfig) # Reconfigures the local master and all children
>>> htcondor.version()
'$CondorVersion: 7.9.4 Jan 02 2013 PRE-RELEASE-UWCS $'
>>> htcondor.platform()
'$CondorPlatform: X86_64-ScientificLinux_6.3 $'

The bindings can use a dictionary where a ClassAd is expected. Here is an example that uses the ClassAd:

htcondor.Schedd().submit(classad.ClassAd({"Cmd": "/bin/echo"}))
This same example, using a dictionary instead of constructing a ClassAd:
htcondor.Schedd().submit({"Cmd": "/bin/echo"})


6.7.3 ClassAd Module

The classad module class provides a dictionary-like mechanism for interacting with the ClassAd language. classad objects implement the iterator interface to iterate through the classad's attributes. The constructor can take a dictionary, and the object can take lists, dictionaries, and ClassAds as values.

classad module functions:

parseOne( input, parser=Auto )

Parse the entire input into a single ClassAd. In the presence of multiple ClassAds or blank lines, continue to merge ClassAds together until the entire string is consumed. Returns a classad object.

Parameter input is a string-like object or a file pointer.

Parameter parser specifies which ClassAd parser to use.

parseNext( input, parser=Auto )

Parse the next ClassAd in the input string. Advances the input object to point after the consumed ClassAd. Returns a classad object.

Parameter input is a file-like object.

Parameter parser specifies which ClassAd parser to use.

parse( input )

This method is no longer used. Parse input into a ClassAd. Returns a ClassAd object.

Parameter input is a string-like object or a file pointer.

parseOld( input )

This method is no longer used. Parse old ClassAd format input into a ClassAd. Returns a ClassAd object.

Parameter input is a string-like object or a file pointer.

version( )

Return the version of the linked ClassAd library.

lastError( )

Return the string representation of the last error to occur in the ClassAd library.

Attribute( name )

Given the string name, return an ExprTree object which is a reference to an attribute of that name. The ClassAd expression foo == 1 can be constructed by the python Attribute("foo") == 1.

Function( name, arg1, arg2, ... )

Given function name name, and zero-or-more arguments, construct an ExprTree which is a function call expression. The function is not evaluated. The ClassAd expression strcat("hello ", "world") can be constructed by the python Function("strcat", "hello ", "world").

Literal( obj )

Given python object obj, convert it to a ClassAd literal. Python strings, floats, integers, and booleans have equivalent literals.

register( function, name=None )

Given the python function function, register it as a ClassAd function. This allows the invocation of the python function from within a ClassAd evaluation context. The optional parameter, name, provides an alternate name for the function within the ClassAd library.

registerLibrary( path )

Given a file system path, attempt to load it as a shared library of ClassAd functions. See the documentation for configuration variable CLASSAD_USER_LIBS for more information about loadable libraries for ClassAd functions.

Standard Python object methods for the ClassAd class:

__init__( str )

Create a ClassAd object from string, str, passed as a parameter. The string must be formatted in the new ClassAd format.

__len__( )

Returns the number of attributes in the ClassAd; allows len(object) semantics for ClassAds.

__str__( )

Converts the ClassAd to a string and returns the string; the formatting style is new ClassAd, with square brackets and semicolons. For example, [ Foo = "bar"; ] may be returned.

The classad object has the following dictionary-like methods:

items( )

Returns an iterator of tuples. Each item returned by the iterator is a tuple representing a pair (attribute,value) in the ClassAd object.

values( )

Returns an iterator of objects. Each item returned by the iterator is a value in the ClassAd.

If the value is a literal, it will be cast to a native Python object, so a ClassAd string will be returned as a Python string.

keys( )

Returns an iterator of strings. Each item returned by the iterator is an attribute string in the ClassAd.

get( attr, value )

Behaves like the corresponding Python dictionary method. Given the attr as key, returns either the value of that key, or if the key is not in the object, returns None or the optional second parameter when specified.

__getitem__( attr )

Returns (as an object) the value corresponding to the attribute attr passed as a parameter.

ClassAd values will be returned as Python objects; ClassAd expressions will be returned as ExprTree objects.

__setitem__( attr, value )

Sets the ClassAd attribute attr to the value.

ClassAd values will be returned as Python objects; ClassAd expressions will be returned as ExprTree objects.

setdefault( attr, value )

Behaves like the corresponding Python dictionary method. If called with an attribute, attr, that is not set, it will set the attribute to the specified value. It returns the value of the attribute. If called with an attribute that is already set, it does not change the object.

update( object )

Behaves like the corresponding Python dictionary method. Updates the ClassAd with the key/value pairs of the given object.

Returns nothing.

Additional methods:

eval( attr )

Evaluate the value given a ClassAd attribute attr. Throws ValueError if unable to evaluate the object.

Returns the Python object corresponding to the evaluated ClassAd attribute.

lookup( attr )

Look up the ExprTree object associated with attribute attr. No attempt will be made to convert to a Python object.

Returns an ExprTree object.

printOld( )

Print the ClassAd in the old ClassAd format.

Returns a string.

quote( str )

Converts the Python string, str, into a ClassAd string literal.

Returns the string literal.

unquote( str )

Converts the Python string, str, escaped as a ClassAd string back to a Python string.

Returns the Python string.

parseAds( input, parser=Auto )

Given input of a string or file, return an iterator of ClassAds. Parameter parser tells which ClassAd parser to use. Note that automatic selection of ClassAd parser does not work on stream input.

Returns an iterator.

parseOldAds( input )

This method is no longer used. Given input of a string or file, return an iterator of ClassAds where the ClassAds are in the Old ClassAd format.

Returns an iterator.

flatten( expression )

Given ExprTree object expression, perform a partial evaluation. All the attributes in expression and defined in this object are evaluated and expanded. Any constant expressions, such as 1 + 2, are evaluated.

Returns a new ExprTree object.

matches( ad )

Given ClassAd object ad, check to see if this object matches the Requirements attribute of ad. Returns true if it does.

symmetricMatch( ad )

Returns true if the given ad matches this and this matches ad. Equivalent to self.matches(ad) and ad.matches(self).

externalRefs( expr )

Returns a python list of external references found in expr. In this context, an external reference is any attribute in the expression which is not found in the ClassAd.

internalRefs( expr )

Returns a python list of internal references found in expr. In this context, an internal reference is any attribute in the expression which is found in the ClassAd.

The ExprTree class object represents an expression in the ClassAd language. The python operators for ExprTree have been overloaded so, if e1 and e2 are ExprTree objects, then e1 + e2 is also a ExprTree object. Lazy-evaluation is used, so an expression "foo" + 1 does not produce an error until it is evaluated with a call to bool() or the .eval() class member.

ExprTree class methods:

__init__( str )

Parse the string str to create an ExprTree.

__str__( )

Represent and return the ClassAd expression as a string.

__int__( )

Converts expression to an integer (evaluating as necessary).

__float__( )

Converts expression to a float (evaluating as necessary).

eval( )

Evaluate the expression and return as a ClassAd value, typically a Python object.

Module enums:

Parser

Tells which ClassAd parser to use. Values may be Auto, Old, or New.


6.7.4 Sample Code using the classad Module

This sample Python code illustrates interactions with the classad module.

$ python
Python 2.6.6 (r266:84292, Jun 18 2012, 09:57:52) 
[GCC 4.4.6 20110731 (Red Hat 4.4.6-3)] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import classad
>>> ad = classad.ClassAd()
>>> expr = classad.ExprTree("2+2")
>>> ad["foo"] = expr
>>> print ad["foo"].eval()
4
>>> ad["bar"] = 2.1
>>> ad["baz"] = classad.ExprTree("time() + 4")
>>> print list(ad)
['bar', 'foo', 'baz']
>>> print dict(ad.items())
{'baz': time() + 4, 'foo': 2 + 2, 'bar': 2.100000000000000E+00}
>>> print ad
    [
        bar = 2.100000000000000E+00; 
        foo = 2 + 2; 
        baz = time() + 4
    ]
>>> ad2=classad.parseOne(open("test_ad", "r"));
>>> ad2["error"] = classad.Value.Error
>>> ad2["undefined"] = classad.Value.Undefined
>>> print ad2
    [
        error = error; 
        bar = 2.100000000000000E+00; 
        foo = 2 + 2; 
        undefined = undefined; 
        baz = time() + 4
    ]
>>> ad2["undefined"]
classad.Value.Undefined

Here is an example that illustrates the dictionary properties of the constructor.

>>> classad.ClassAd({"foo": "bar"})
[ foo = "bar" ]
>>> ad = classad.ClassAd({"foo": [1, 2, 3]})
>>> ad
[ foo = { 1,2,3 } ]
>>> ad["foo"][2]
3L
>>> ad = classad.ClassAd({"foo": {"bar": 1}})
>>> ad
[ foo = [ bar = 1 ] ]
>>> ad["foo"]["bar"]
1L

Here are examples that illustrate the get method.

>>> ad = classad.ClassAd({"foo": "bar"})
>>> ad
[ foo = "bar" ]
>>> ad["foo"]
'bar'
>>> ad.get("foo")
'bar'
>>> ad.get("foo", 2)
'bar'
>>> ad.get("baz", 2)
2
>>> ad.get("baz")
>>>

Here are examples that illustrate the setdefault method.

>>> ad = classad.ClassAd()
>>> ad
[  ]
>>> ad["foo"]
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
KeyError: 'foo'
>>> ad.setdefault("foo", 1)
1
>>> ad
[ foo = 1 ]
>>> ad.setdefault("foo", 2)
1L
>>> ad
[ foo = 1 ]

Here is an example that illustrates the use of the iterator parseAds method on a history log.

>>> import classad
>>> import os
>>> fd = os.popen("condor_history -l -match 4")
>>> ads = classad.parseAds(fd, classad.Parser.Old)
>>> print [ad["ClusterId"] for ad in ads]
[23389L, 23388L, 23386L, 23387L]
>>>


next up previous contents index
Next: 7. Platform-Specific Information Up: 6. Application Programming Interfaces Previous: 6.6 The HTCondor Perl   Contents   Index