This section contains the instructions for installing HTCondor. The installation will have a default configuration that can be customized. Sections of the manual below explain customization.
Please read this entire section before starting installation.
Please read the copyright and disclaimer information in section . Installation and use of HTCondor is acknowledgment that you have read and agree to the terms.
Before installing HTCondor, please consider joining the htcondor-world mailing list. Traffic on this list is kept to an absolute minimum; it is only used to announce new releases of HTCondor. To subscribe, go to https://lists.cs.wisc.edu/mailman/listinfo/htcondor-world, and fill out the online form.
You might also want to consider joining the htcondor-users mailing list. This list is meant to be a forum for HTCondor users to learn from each other and discuss using HTCondor. It is an excellent place to ask the HTCondor community about using and configuring HTCondor. To subscribe, go to https://lists.cs.wisc.edu/mailman/listinfo/htcondor-users, and fill out the online form.
Note that forward and reverse DNS lookup must be enabled for HTCondor to work properly.
The first step to installing HTCondor is to download it from the HTCondor web site, http://htcondor.org/. The downloads are available from the downloads page, at http://htcondor.org/downloads/.
The HTCondor binary distribution is packaged in the following files and directories:
Before installation, you need to make a few important decisions about the basic layout of your pool. These decisions answer the following questions:
One machine in your pool must be the central manager. Install HTCondor on this machine first. This is the centralized information repository for the HTCondor pool, and it is also the machine that does match-making between available machines and submitted jobs. If the central manager machine crashes, any currently active matches in the system will keep running, but no new matches will be made. Moreover, most HTCondor tools will stop working. Because of the importance of this machine for the proper functioning of HTCondor, install the central manager on a machine that is likely to stay up all the time, or on one that will be rebooted quickly if it does crash.
Also consider network traffic and your network layout when choosing your central manager. All the daemons send updates (by default, every 5 minutes) to this machine. Memory requirements for the central manager differ by the number of machines in the pool: a pool with up to about 100 machines will require approximately 25 Mbytes of memory for the central manager’s tasks, and a pool with about 1000 machines will require approximately 100 Mbytes of memory for the central manager’s tasks.
A faster CPU will speed up matchmaking.
Generally jobs should not be either submitted or run on the central manager machine.
HTCondor can restrict the machines allowed to submit jobs. Alternatively, it can allow any machine the network allows to connect to a submit machine to submit jobs. If the HTCondor pool is behind a firewall, and all machines inside the firewall are trusted, the ALLOW_WRITE configuration entry can be set to */*. Otherwise, it should be set to reflect the set of machines permitted to submit jobs to this pool. HTCondor tries to be secure by default: it is shipped with an invalid value that allows no machine to connect and submit jobs.
We strongly recommend that the HTCondor daemons be installed and run as the Unix user root. Without this, HTCondor can do very little to enforce security and policy decisions. You can install HTCondor as any user; however there are serious security and performance consequences do doing a non-root installation. Please see section 3.8.13 in the manual for the details and ramifications of installing and running HTCondor as a Unix user other than root.
Either root will be administering HTCondor directly, or someone else will be acting as the HTCondor administrator. If root has delegated the responsibility to another person, keep in mind that as long as HTCondor is started up as root, it should be clearly understood that whoever has the ability to edit the condor configuration files can effectively run arbitrary programs as root.
The HTCondor administrator will be regularly updating HTCondor by following these instructions or by using the system-specific installation methods below. The administrator will also customize policies of the HTCondor submit and execute nodes. This person will also receive information from HTCondor if something goes wrong with the pool, as described in the documentation of the CONDOR_ADMIN configuration variable.
To simplify installation of HTCondor, you should create a Unix user named condor on all machines in the pool. The HTCondor daemons will create files (such as the log files) owned by this user, and the home directory can be used to specify the location of files and directories needed by HTCondor. The home directory of this user can either be shared among all machines in your pool, or could be a separate home directory on the local partition of each machine. Both approaches have advantages and disadvantages. Having the directories centralized can make administration easier, but also concentrates the resource usage such that you potentially need a lot of space for a single shared home directory. See the section below on machine-specific directories for more details.
Note that the user condor must not be an account into which a person can log in. If a person can log in as user condor, it permits a major security breach, in that the user condor could submit jobs that run as any other user, providing complete access to the user’s data by the jobs. A standard way of not allowing log in to an account on Unix platforms is to enter an invalid shell in the password file.
If you choose not to create a user named condor, then you must specify either via the CONDOR_IDS environment variable or the CONDOR_IDS config file setting which uid.gid pair should be used for the ownership of various HTCondor files. See section 3.8.13 on UIDs in HTCondor in the Administrator’s Manual for details.
HTCondor needs a few directories that are unique on every machine in your pool. These are execute, spool, log, (and possibly lock). Generally, all of them are subdirectories of a single machine specific directory called the local directory (specified by the LOCAL_DIR macro in the configuration file). Each should be owned by the user that HTCondor is to be run as. Do not stage other files in any of these directories; any files not created by HTCondor in these directories are subject to removal.
If you have a Unix user named condor with a local home directory on each machine, the LOCAL_DIR could just be user condor’s home directory (LOCAL_DIR = $(TILDE) in the configuration file). If this user’s home directory is shared among all machines in your pool, you would want to create a directory for each host (named by host name) for the local directory (for example, LOCAL_DIR = $(TILDE)/hosts/$(HOSTNAME)). If you do not have a condor account on your machines, you can put these directories wherever you’d like. However, where to place the directories will require some thought, as each one has its own resource needs:
Generally speaking, it is recommended that you do not put these directories (except lock) on the same partition as /var, since if the partition fills up, you will fill up /var as well. This will cause lots of problems for your machines. Ideally, you will have a separate partition for the HTCondor directories. Then, the only consequence of filling up the directories will be HTCondor’s malfunction, not your whole machine.
The location of configuration files is described in section 3.3.2.
Every binary distribution contains a contains five subdirectories: bin, etc, lib, sbin, and libexec. Wherever you choose to install these five directories we call the release directory (specified by the RELEASE_DIR macro in the configuration file). Each release directory contains platform-dependent binaries and libraries, so you will need to install a separate one for each kind of machine in your pool. For ease of administration, these directories should be located on a shared file system, if possible.
All of the files in the bin directory are programs that HTCondor users should expect to have in their path. You could either put them in a well known location (such as /usr/local/condor/bin) which you have HTCondor users add to their PATH environment variable, or copy those files directly into a well known place already in the user’s PATHs (such as /usr/local/bin). With the above examples, you could also leave the binaries in /usr/local/condor/bin and put in soft links from /usr/local/bin to point to each program.
All of the files in the sbin directory are HTCondor daemons and agents, or programs that only the HTCondor administrator would need to run. Therefore, add these programs only to the PATH of the HTCondor administrator.
All of the files in the libexec directory are HTCondor programs that should never be run by hand, but are only used internally by HTCondor.
The files in the lib directory are the HTCondor libraries that must be linked in with user jobs for all of HTCondor’s checkpointing and migration features to be used. lib also contains scripts used by the condor_compile program to help re-link jobs with the HTCondor libraries. These files should be placed in a location that is world-readable, but they do not need to be placed in anyone’s PATH. The condor_compile script checks the configuration file for the location of the lib directory.
etc contains an examples subdirectory which holds various example configuration files and other files used for installing HTCondor. etc is the recommended location to keep the master copy of your configuration files. You can put in soft links from one of the places mentioned above that HTCondor checks automatically to find its global configuration file.
The documentation provided with HTCondor is currently available in HTML, Postscript and PDF (Adobe Acrobat). It can be locally installed wherever is customary at your site. You can also find the HTCondor documentation on the web at: http://htcondor.org/manual.
If you are using AFS at your site, be sure to read the section 3.14.1 in the manual. HTCondor does not currently have a way to authenticate itself to AFS. A solution is not ready for Version 8.8.1. This implies that you are probably not going to want to have the LOCAL_DIR for HTCondor on AFS. However, you can (and probably should) have the HTCondor RELEASE_DIR on AFS, so that you can share one copy of those files and upgrade them in a centralized location. You will also have to do something special if you submit jobs to HTCondor from a directory on AFS. Again, read manual section 3.14.1 for all the details.
The compressed downloads of HTCondor currently range from a low of about 13 Mbytes for 64-bit Ubuntu 12/Linux to about 115 Mbytes for Windows. The compressed source code takes approximately 17 Mbytes.
In addition, you will need a lot of disk space in the local directory of any machines that are submitting jobs to HTCondor. See question 6 above for details on this.
Installing HTCondor from repositories preferred for systems that you administer. If you do not have administrative access, use the tarball instructions below.
Repositories are available Red Hat Enterprise Linux and derivatives such as CentOS and Scientific Linux. Repositories are also available for Debian and Ubuntu LTS. Visit the installation documentation at https://research.cs.wisc.edu/htcondor/instructions/
Note that installation from a tarball is no longer the preferred method for installing HTCondor on Unix systems. Installation via RPM or Debian package is recommended if available for your Unix version.
An overview of the tarball-based installation process is as follows:
Details are given below.
After download, all the files are in a compressed, tar format. They need to be untarred, as
After untarring, the directory will have the Perl scripts condor_configure and condor_install (and bosco_install), as well as bin, etc, examples, include, lib, libexec, man, sbin, sql and src subdirectories.
The Perl script condor_configure installs HTCondor. Command-line arguments specify all needed information to this script. The script can be executed multiple times, to modify or further set the configuration. condor_configure has been tested using Perl 5.003. Use this or a more recent version of Perl.
condor_configure and condor_install are the same program, but have different default behaviors. condor_install is identical to running
condor_configure and condor_install work on the named directories. As the names imply, condor_install is used to install HTCondor, whereas condor_configure is used to modify the configuration of an existing HTCondor install.
condor_configure and condor_install are completely command-line driven and are not interactive. Several command-line arguments are always needed with condor_configure and condor_install. The argument
specifies the path to the HTCondor release directories. The default command-line argument for condor_install is
specifies the path to the install directory.
specifies the path to the local directory.
The --type option to condor_configure specifies one or more of the roles that a machine can take on within the HTCondor pool: central manager, submit or execute. These options are given in a comma separated list. So, if a machine is both a submit and execute machine, the proper command-line option is
Install HTCondor on the central manager machine first. If HTCondor will run as root in this pool (Item 3 above), run condor_install as root, and it will install and set the file permissions correctly. On the central manager machine, run condor_install as follows.
To update the above HTCondor installation, for example, to also be submit machine:
As in the above example, the central manager can also be a submit point or an execute machine, but this is only recommended for very small pools. If this is the case, the --type option changes to manager,execute or manager,submit or manager,submit,execute.
After the central manager is installed, the execute and submit machines should then be configured. Decisions about whether to run HTCondor as root should be consistent throughout the pool. For each machine in the pool, run
See the condor_configure manual page 1851 for details.
Now that HTCondor has been installed on the machine(s), there are a few things to check before starting up HTCondor.
For Unix platforms other than Linux, HTCondor can monitor the activity of your mouse and keyboard, provided that you tell it where to look. You do this with the CONSOLE_DEVICES entry in the condor_startd section of the configuration file. On most platforms, reasonable defaults are provided. For example, the default device for the mouse is ’mouse’, since most installations have a soft link from /dev/mouse that points to the right device (such as tty00 if you have a serial mouse, psaux if you have a PS/2 bus mouse, etc). If you do not have a /dev/mouse link, you should either create one (you will be glad you did), or change the CONSOLE_DEVICES entry in HTCondor’s configuration file. This entry is a comma separated list, so you can have any devices in /dev count as ’console devices’ and activity will be reported in the condor_startd’s ClassAd as ConsoleIdleTime.
To start up the HTCondor daemons, execute the command <release_dir>/sbin/condor_master. This is the HTCondor master, whose only job in life is to make sure the other HTCondor daemons are running. The master keeps track of the daemons, restarts them if they crash, and periodically checks to see if you have installed new binaries (and, if so, restarts the affected daemons).
If you are setting up your own pool, you should start HTCondor on your central manager machine first. If you have done a submit-only installation and are adding machines to an existing pool, the start order does not matter.
To ensure that HTCondor is running, you can run either:
depending on your flavor of Unix. On a central manager machine that can submit jobs as well as execute them, there will be processes for:
On a central manager machine that does not submit jobs nor execute them, there will be processes for:
For a machine that only submits jobs, there will be processes for:
For a machine that only executes jobs, there will be processes for:
Once you are sure the HTCondor daemons are running, check to make sure that they are communicating with each other. You can run condor_status to get a one line summary of the status of each machine in your pool.
Once you are sure HTCondor is working properly, you should add condor_master into your startup/bootup scripts (i.e. /etc/rc ) so that your machine runs condor_master upon bootup. condor_master will then fire up the necessary HTCondor daemons whenever your machine is rebooted.
If your system uses System-V style init scripts, you can look in <release_dir>/etc/examples/condor.boot for a script that can be used to start and stop HTCondor automatically by init. Normally, you would install this script as /etc/init.d/condor and put in soft link from various directories (for example, /etc/rc2.d) that point back to /etc/init.d/condor. The exact location of these scripts and links will vary on different platforms.
If your system uses BSD style boot scripts, you probably have an /etc/rc.local file. Add a line to start up <release_dir>/sbin/condor_master.
Now that the HTCondor daemons are running, there are a few things you can and should do:
This section contains the instructions for installing the Windows version of HTCondor. The install program will set up a slightly customized configuration file that can be further customized after the installation has completed.
Be sure that the HTCondor tools are of the same version as the daemons installed. The HTCondor executable for distribution is packaged in a single file named similarly to:
This file is approximately 107 Mbytes in size, and it can be removed once HTCondor is fully installed.
For any installation, HTCondor services are installed and run as the Local System account. Running the HTCondor services as any other account (such as a domain user) is not supported and could be problematic.
Before installing the Windows version of HTCondor, there are two major decisions to make about the basic layout of the pool.
If the answers to these questions are already known, skip to the Windows Installation Procedure section below, section 3.2.3. If unsure, read on.
One machine in your pool must be the central manager. This is the centralized information repository for the HTCondor pool and is also the machine that matches available machines with waiting jobs. If the central manager machine crashes, any currently active matches in the system will keep running, but no new matches will be made. Moreover, most HTCondor tools will stop working. Because of the importance of this machine for the proper functioning of HTCondor, we recommend installing it on a machine that is likely to stay up all the time, or at the very least, one that will be rebooted quickly if it does crash. Also, because all the services will send updates (by default every 5 minutes) to this machine, it is advisable to consider network traffic and network layout when choosing the central manager.
Install HTCondor on the central manager before installing on the other machines within the pool.
Generally jobs should not be either submitted or run on the central manager machine.
The HTCondor release directory takes up a fair amount of space. The size requirement for the release directory is approximately 250 Mbytes. HTCondor itself, however, needs space to store all of the jobs and their input files. If there will be large numbers of jobs, consider installing HTCondor on a volume with a large amount of free space.
Installation of HTCondor must be done by a user with administrator privileges. After installation, the HTCondor services will be run under the local system account. When HTCondor is running a user job, however, it will run that user job with normal user permissions.
Download HTCondor, and start the installation process by running the installer. The HTCondor installation is completed by answering questions and choosing options within the following steps.
If HTCondor has been previously installed, a dialog box will appear before the installation of HTCondor proceeds. The question asks if you wish to preserve your current HTCondor configuration files. Answer yes or no, as appropriate.
If you answer yes, your configuration files will not be changed, and you will proceed to the point where the new binaries will be installed.
If you answer no, then there will be a second question that asks if you want to use answers given during the previous installation as default answers.
The first step in installing HTCondor is a welcome screen and license agreement. You are reminded that it is best to run the installation when no other Windows programs are running. If you need to close other Windows programs, it is safe to cancel the installation and close them. You are asked to agree to the license. Answer yes or no. If you should disagree with the License, the installation will not continue.
Also fill in name and company information, or use the defaults as given.
The HTCondor configuration needs to be set based upon if this is a new pool or to join an existing one. Choose the appropriate radio button.
For a new pool, enter a chosen name for the pool. To join an existing pool, enter the host name of the central manager of the pool.
Each machine within an HTCondor pool can either submit jobs or execute submitted jobs, or both submit and execute jobs. A check box determines if this machine will be a submit point for the pool.
A set of radio buttons determines the ability and configuration of the ability to execute jobs. There are four choices:
For testing purposes, it is often helpful to use the always run HTCondor jobs option.
For a machine that is to execute jobs and the choice is one of the last two in the list, HTCondor needs to further know what to do with the currently running jobs. There are two choices:
This choice involves a trade off. Restarting the job on a different machine is less intrusive on the workstation owner than leaving the job in memory for a later time. A suspended job left in memory will require swap space, which could be a scarce resource. Leaving a job in memory, however, has the benefit that accumulated run time is not lost for a partially completed job.
Enter the machine’s accounting (or UID) domain. On this version of HTCondor for Windows, this setting is only used for user priorities (see section 3.6) and to form a default e-mail address for the user.
Various parts of HTCondor will send e-mail to an HTCondor administrator if something goes wrong and requires human attention. Specify the e-mail address and the SMTP relay host of this administrator. Please pay close attention to this e-mail, since it will indicate problems in the HTCondor pool.
For more details on these access permissions, and others that can be manually changed in your configuration file, please see the section titled Setting Up IP/Host-Based Security in HTCondor in section section 3.8.9.
Running HDFS requires Java to be installed, and HTCondor must know where the installation is. Running HDFS in data node mode also requires the installation of Cygwin, and the path to the Cygwin directory must be added to the global PATH environment variable.
HDFS has several configuration options that must be filled in to be used.
The next step is where the destination of the HTCondor files will be decided. We recommend that HTCondor be installed in the location shown as the default in the install choice: C:\Condor. This is due to several hard coded paths in scripts and configuration files. Clicking on the Custom choice permits changing the installation directory.
Installation on the local disk is chosen for several reasons. The HTCondor services run as local system, and within Microsoft Windows, local system has no network privileges. Therefore, for HTCondor to operate, HTCondor should be installed on a local hard drive, as opposed to a network drive (file server).
The second reason for installation on the local disk is that the Windows usage of drive letters has implications for where HTCondor is placed. The drive letter used must be not change, even when different users are logged in. Local drive letters do not change under normal operation of Windows.
While it is strongly discouraged, it may be possible to place HTCondor on a hard drive that is not local, if a dependency is added to the service control manager such that HTCondor starts after the required file services are available.
This section details how to run the HTCondor for Windows installer in an unattended batch mode. This mode is one that occurs completely from the command prompt, without the GUI interface.
The HTCondor for Windows installer uses the Microsoft Installer (MSI) technology, and it can be configured for unattended installs analogous to any other ordinary MSI installer.
The following is a sample batch file that is used to set all the properties necessary for an unattended install.
Each property corresponds to answers that would have been supplied while running an interactive installer. The following is a brief explanation of each property as it applies to unattended installations:
After defining each of these properties for the MSI installer, the installer can be started with the msiexec command. The following command starts the installer in unattended mode, and it dumps a journal of the installer’s progress to a log file:
More information on the features of msiexec can be found at Microsoft’s website at http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/msiexec.mspx.
If you are to install HTCondor on many different machines, you may wish to use some other mechanism to install HTCondor on additional machines rather than running the Setup program described above on each machine.
WARNING: This is for advanced users only! All others should use the Setup program described above.
Here is a brief overview of how to install HTCondor manually without using the provided GUI-based setup program:
The HTCondor service can be installed and removed using the sc.exe tool, which is included in Windows XP and Windows 2003 Server. The tool is also available as part of the Windows 2000 Resource Kit.
Installation can be done as follows:
To remove the service, use:
CONDOR_CONFIG should point to the condor_config file. In this version of HTCondor, it must reside on the local disk.
RELEASE_DIR should point to the directory where HTCondor is installed. This is typically C:\Condor, and again, this must reside on the local disk.
These files currently must reside on the local disk for a variety of reasons. Advanced Windows users might be able to put the files on remote resources. The main concern is twofold. First, the files must be there when the service is started. Second, the files must always be in the same spot (including drive letter), no matter who is logged into the machine.
Note also that when installing manually, you will need to create the directories that HTCondor will expect to be present given your configuration. This normally is simply a matter of creating the log, spool, and execute directories. Do not stage other files in any of these directories; any files not created by HTCondor in these directories are subject to removal.
After the installation of HTCondor is completed, the HTCondor service must be started. If you used the GUI-based setup program to install HTCondor, the HTCondor service should already be started. If you installed manually, HTCondor must be started by hand, or you can simply reboot. NOTE: The HTCondor service will start automatically whenever you reboot your machine.
To start HTCondor by hand:
Or, alternatively you can enter the following command from a command prompt:
Run the Task Manager (Control-Shift-Escape) to check that HTCondor services are running. The following tasks should be running:
Also, you should now be able to open up a new cmd (DOS prompt) window, and the HTCondor bin directory should be in your path, so you can issue the normal HTCondor commands, such as condor_q and condor_status.
Once HTCondor services are running, try submitting test jobs. Example 2 within section 2.5.1 presents a vanilla universe job.
An upgrade changes the running version of HTCondor from the current installation to a newer version. The safe method to install and start running a newer version of HTCondor in essence is: shut down the current installation of HTCondor, install the newer version, and then restart HTCondor using the newer version. To allow for falling back to the current version, place the new version in a separate directory. Copy the existing configuration files, and modify the copy to point to and use the new version, as well as incorporate any configuration variables that are new or changed in the new version. Set the CONDOR_CONFIG environment variable to point to the new copy of the configuration, so the new version of HTCondor will use the new configuration when restarted.
As of HTCondor version 8.2.0, the default configuration file has been substantially reduced in size by defining compile-time default values for most configuration variables. Therefore, when upgrading from a version of HTCondor earlier than 8.2.0 to a more recent version, the option of reducing the size of the configuration file is an option. The goal is to identify and use only the configuration variable values that differ from the compile-time default values. This is facilitated by using condor_config_val with the -writeconfig:upgrade argument, to create a file that behaves the same as the current configuration, but is much smaller, because values matching the default values (as well as some obsolete variables) have been removed. Items in the file created by running condor_config_val with the -writeconfig:upgrade argument will be in the order that they were read from the original configuration files. This file is a convenient guide to stripping the cruft from old configuration files.
When upgrading from a version of HTCondor earlier than 6.8 to more recent version, note that the configuration settings must be modified for security reasons. Specifically, the HOSTALLOW_WRITE configuration variable must be explicitly changed, or no jobs can be submitted, and error messages will be issued by HTCondor tools.
Another way to upgrade leaves HTCondor running. HTCondor will automatically restart itself if the condor_master binary is updated, and this method takes advantage of this. Download the newer version, placing it such that it does not overwrite the currently running version. With the download will be a new set of configuration files; update this new set with any specializations implemented in the currently running version of HTCondor. Then, modify the currently running installation by changing its configuration such that the path to binaries points instead to the new binaries. One way to do that (under Unix) is to use a symbolic link that points to the current HTCondor installation directory (for example, /opt/condor). Change the symbolic link to point to the new directory. If HTCondor is configured to locate its binaries via the symbolic link, then after the symbolic link changes, the condor_master daemon notices the new binaries and restarts itself. How frequently it checks is controlled by the configuration variable MASTER_CHECK_NEW_EXEC_INTERVAL , which defaults 5 minutes.
When the condor_master notices new binaries, it begins a graceful restart. On an execute machine, a graceful restart means that running jobs are preempted. Standard universe jobs will attempt to take a checkpoint. This could be a bottleneck if all machines in a large pool attempt to do this at the same time. If they do not complete within the cutoff time specified by the KILL policy expression (defaults to 10 minutes), then the jobs are killed without producing a checkpoint. It may be appropriate to increase this cutoff time, and a better approach may be to upgrade the pool in stages rather than all at once.
For universes other than the standard universe, jobs are preempted. If jobs have been guaranteed a certain amount of uninterrupted run time with MaxJobRetirementTime, then the job is not killed until the specified amount of retirement time has been exceeded (which is 0 by default). The first step of killing the job is a soft kill signal, which can be intercepted by the job so that it can exit gracefully, perhaps saving its state. If the job has not gone away once the KILL expression fires (10 minutes by default), then the job is forcibly hard-killed. Since the graceful shutdown of jobs may rely on shared resources such as disks where state is saved, the same reasoning applies as for the standard universe: it may be appropriate to increase the cutoff time for large pools, and a better approach may be to upgrade the pool in stages to avoid jobs running out of time.
Another time limit to be aware of is the configuration variable SHUTDOWN_GRACEFUL_TIMEOUT. This defaults to 30 minutes. If the graceful restart is not completed within this time, a fast restart ensues. This causes jobs to be hard-killed.
All of the commands described in this section are subject to the security policy chosen for the HTCondor pool. As such, the commands must be either run from a machine that has the proper authorization, or run by a user that is authorized to issue the commands. Section 3.8 details the implementation of security in HTCondor.
To stop a single execute machine from running jobs, the condor_off command specifies the machine by host name.
A running standard universe job will be allowed to take a checkpoint before the job is killed. A running job under another universe will be killed. If it is instead desired that the machine stops running jobs only after the currently executing job completes, the command is
Note that this waits indefinitely for the running job to finish, before the condor_startd daemon exits.
Th shut down all execution machines within the pool,
To wait indefinitely for each machine in the pool to finish its current HTCondor job, shutting down all of the execute machines as they no longer have a running job,
To shut down HTCondor on a machine from which jobs are submitted,
If it is instead desired that the submit machine shuts down only after all jobs that are currently in the queue are finished, first disable new submissions to the queue by setting the configuration variable
See instructions below in section 3.2.6 for how to reconfigure a pool. After the reconfiguration, the command to wait for all jobs to complete and shut down the submission of jobs is
Substitute the option -all for the host name, if all submit machines in the pool are to be shut down.
If no HTCondor daemons are running, then starting HTCondor is a matter of executing the condor_master daemon. The condor_master daemon will then invoke all other specified daemons on that machine. The condor_master daemon executes on every machine that is to run HTCondor.
If a specific daemon needs to be started up, and the condor_master daemon is already running, then issue the command on the specific machine with
where <subsystemname> is replaced by the daemon’s subsystem name. Or, this command might be issued from another machine in the pool (which has administrative authority) with
where <subsystemname> is replaced by the daemon’s subsystem name, and <hostname> is replaced by the host name of the machine where this condor_on command is to be directed.
To restart all daemons on all machines in the pool,
To restart all daemons on a single machine in the pool,
where <hostname> is replaced by the host name of the machine to be restarted.
To change a global configuration variable and have all the machines start to use the new setting, change the value within the file, and send a condor_reconfig command to each host. Do this with a single command,
If the global configuration file is not shared among all the machines, as it will be if using a shared file system, the change must be made to each copy of the global configuration file before issuing the condor_reconfig command.
Issuing a condor_reconfig command is inadequate for some configuration variables. For those, a restart of HTCondor is required. Those configuration variables that require a restart are listed in section 3.3.11. The manual page for condor_restart is at 2052.
⇐ ↙ ↑ ⇑ ⇒ Contents Index