This is an outdated version of the HTCondor Manual. You can find current documentation at http://htcondor.org/manual.
next up previous contents index
Next: condor_vacate Up: 11. Command Reference Manual Previous: condor_userlog   Contents   Index

Subsections


condor_userprio

Manage user priorities

Synopsis

condor_userprio [-pool centralmanagerhostname[:portnumber]] [Edit option] $\vert$ [Display options]

Description

condor_userprio either modifies priority-related information or displays priority-related information. Displayed information comes from the accountant log, where the condor_negotiator daemon stores historical usage information in the file at $(SPOOL)/Accountantnew.log. Which fields are displayed changes based on command line arguments. condor_userprio with no arguments, lists the active users along with their priorities, in increasing priority order. The -all option can be used to display more detailed information about each user, resulting in a rather wide display, and includes the following columns:

Effective Priority
The effective priority value of the user, which is used to calculate the user's share when allocating resources. A lower value means a higher priority, and the minimum value (highest priority) is 0.5. The effective priority is calculated by multiplying the real priority by the priority factor.
Real Priority
The value of the real priority of the user. This value follows the user's resource usage.
Priority Factor
The system administrator can set this value for each user, thus controlling a user's effective priority relative to other users. This can be used to create different classes of users.
Res Used
The number of resources currently used.
Accumulated Usage
The accumulated number of resource-hours used by the user since the usage start time.
Usage Start Time
The time since when usage has been recorded for the user. This time is set when a user job runs for the first time. It is reset to the present time when the usage for the user is reset.
Last Usage Time
The most recent time a resource usage has been recorded for the user.

By default only users for whom usage was recorded in the last 24 hours, or whose priority is greater than the minimum are listed.

The -pool option can be used to contact a different central manager than the local one (the default).

For security purposes of authentication and authorization, specifying an Edit Option requires an administrator's level of access. See section 3.6.1 on page [*] for further explanation.

Options

-pool centralmanagerhostname[:portnumber]
Contact the specified centralmanagerhostname with an optional port number, instead of the local central manager. This can be used to check other pools. NOTE: The host name (and optional port) specified refer to the host name (and port) of the condor_negotiator to query for user priorities. This is slightly different than most HTCondor tools that support a -pool option, and instead expect the host name (and port) of the condor_collector.

-delete username
(Edit option) Remove the specified username from HTCondor's accounting.

-resetall
(Edit option) Reset the accumulated usage of all the users to zero.

-resetusage username
(Edit option) Reset the accumulated usage of the user specified by username to zero.

-setaccum username value
(Edit option) Set the accumulated usage of the user specified by username to the specified floating point value.

-setbegin username value
(Edit option) Set the begin usage time of the user specified by username to the specified value.

-setfactor username value
(Edit option) Set the priority factor of the user specified by username to the specified value.

-setlast username value
(Edit option) Set the last usage time of the user specified by username to the specified value.

-setprio username value
(Edit option) Set the real priority of the user specified by username to the specified value.

-activefrom month day year
(Display option) Display information for users who have some recorded accumulated usage since the specified date.

-all
(Display option) Display all available fields about each group or user.

-allusers
(Display option) Display information for all the users who have some recorded accumulated usage.

-flat
(Display option) Display information such that users within hierarchical groups are not listed with their group.

-getreslist username
(Display option) Display all the resources currently allocated to the user specified by username.

-grouporder
(Display option) Display submitter information with accounting group entries at the top of the list, and in breadth-first order within the group hierarchy tree.

-grouprollup
(Display option) For hierarchical groups, the display shows sums as computed for groups, and these sums include sub groups.

-hierarchical
(Display option) Display information such that users within hierarchical groups are listed with their group.

-long
(Display option) A verbose output which displays entire ClassAds.

-most
(Display option) Display fields considered to be the most useful. This is the default set of fields displayed.

-priority
(Display option) Display fields with user priority information.

-quotas
(Display option) Display fields relevant to hierarchical group quotas.

-usage
(Display option) Display usage information for each group or user.

Examples

Example 1 Since the output varies due to command line arguments, here is an example of the default output for a pool that does not use Hierarchical Group Quotas. This default output is the same as given with the -most Display option.

Last Priority Update:  1/19 13:14
                        Effective   Priority   Res   Total Usage  Time Since
User Name                Priority    Factor   In Use (wghted-hrs) Last Usage
---------------------- ------------ --------- ------ ------------ ----------
www-cndr@cs.wisc.edu           0.56      1.00      0    591998.44    0+16:30
joey@cs.wisc.edu               1.00      1.00      1       990.15 <now>
suzy@cs.wisc.edu               1.53      1.00      0       261.78    0+09:31
leon@cs.wisc.edu               1.63      1.00      2     12597.82 <now>
raj@cs.wisc.edu                3.34      1.00      0      8049.48    0+01:39
jose@cs.wisc.edu               3.62      1.00      4     58137.63 <now>
betsy@cs.wisc.edu             13.47      1.00      0      1475.31    0+22:46
petra@cs.wisc.edu            266.02    500.00      1    288082.03 <now>
carmen@cs.wisc.edu           329.87     10.00    634   2685305.25 <now>
carlos@cs.wisc.edu           687.36     10.00      0     76555.13    0+14:31
ali@proj1.wisc.edu          5000.00  10000.00      0      1315.56    0+03:33
apu@nnland.edu              5000.00  10000.00      0       482.63    0+09:56
pop@proj1.wisc.edu         26688.11  10000.00      1     49560.88 <now>
franz@cs.wisc.edu          29352.06    500.00    109    600277.88 <now>
martha@nnland.edu          58030.94  10000.00      0     48212.79    0+12:32
izzi@nnland.edu            62106.40  10000.00      0      6569.75    0+02:26
marta@cs.wisc.edu          62577.84    500.00     29    193706.30 <now>
kris@proj1.wisc.edu       100597.94  10000.00      0     20814.24    0+04:26
boss@proj1.wisc.edu       318229.25  10000.00      3    324680.47 <now>
---------------------- ------------ --------- ------ ------------ ----------
Number of users: 19                              784   4969073.00    0+23:59

Example 2 This is an example of the default output for a pool that uses hierarchical groups, and the groups accept surplus. This leads to a very wide display.

% condor_userprio -pool crane.cs.wisc.edu -allusers
Last Priority Update:  1/19 13:18
Group                                 Config     Use    Effective   Priority   Res   Total Usage  Time Since
  User Name                            Quota   Surplus   Priority    Factor   In Use (wghted-hrs) Last Usage
------------------------------------ --------- ------- ------------ --------- ------ ------------ ----------
<none>                                    0.00     yes                   1.00      0         6.78    9+03:52
  johnsm@crane.cs.wisc.edu                                     0.50      1.00      0         6.62    9+19:42
  John.Smith@crane.cs.wisc.edu                                 0.50      1.00      0         0.02    9+03:52
  Sedge@crane.cs.wisc.edu                                      0.50      1.00      0         0.05   13+03:03
  Duck@crane.cs.wisc.edu                                       0.50      1.00      0         0.02   31+00:28
  other@crane.cs.wisc.edu                                      0.50      1.00      0         0.04   16+03:42
Duck                                      2.00      no                   1.00      0         0.02   13+02:57
  goose@crane.cs.wisc.edu                                      0.50      1.00      0         0.02   13+02:57
Sedge                                     4.00      no                   1.00      0         0.17    9+03:07
  johnsm@crane.cs.wisc.edu                                     0.50      1.00      0         0.13    9+03:08
  Half@crane.cs.wisc.edu                                       0.50      1.00      0         0.02   31+00:02
  John.Smith@crane.cs.wisc.edu                                 0.50      1.00      0         0.05    9+03:07
  other@crane.cs.wisc.edu                                      0.50      1.00      0         0.01   28+19:34
------------------------------------ --------- ------- ------------ --------- ------ ------------ ----------
Number of users: 10                            ByQuota                             0         6.97

Exit Status

condor_userprio will exit with a status value of 0 (zero) upon success, and it will exit with the value 1 (one) upon failure.

Author

Center for High Throughput Computing, University of Wisconsin-Madison

Copyright

Copyright © 1990-2013 Center for High Throughput Computing, Computer Sciences Department, University of Wisconsin-Madison, Madison, WI. All Rights Reserved. Licensed under the Apache License, Version 2.0.

See the HTCondor Version 7.9.6 Manual or http://research.cs.wisc.edu/htcondor/ for additional notices.


next up previous contents index
Next: condor_vacate Up: 11. Command Reference Manual Previous: condor_userlog   Contents   Index
htcondor-admin@cs.wisc.edu