next up previous contents index
Next: condor_qedit Up: 11. Command Reference Manual Previous: condor_procd   Contents   Index

Subsections


condor_q

Display information about jobs in queue

Synopsis

condor_q [-help [Universe | State]]

condor_q [-debug] [general options] [restriction list] [output options] [analyze options]

Description

condor_q displays information about jobs in the HTCondor job queue. By default, condor_q queries the local job queue, but this behavior may be modified by specifying one of the general options.

To restrict the display to jobs of interest, a list of zero or more restriction options may be supplied. Each restriction may be one of:

If no restrictions are present in the list to specify an owner, the job matches the restriction list if it matches at least one restriction in the list. If owner restrictions are present, the job matches the list if it matches one of the owner restrictions and at least one non-owner restriction.

If the -long option is specified, condor_q displays a long description of the queried jobs by printing the entire job ClassAd. The attributes of the job ClassAd may be displayed by means of the -format option, which displays attributes with a printf(3) format. Multiple -format options may be specified in the option list to display several attributes of the job. If neither -long or -format are specified, condor_q displays a one line summary of information as follows:

ID
The cluster/process id of the condor job.
OWNER
The owner of the job.
SUBMITTED
The month, day, hour, and minute the job was submitted to the queue.
RUN_TIME
Wall-clock time accumulated by the job to date in days, hours, minutes, and seconds.
ST
Current status of the job, which varies somewhat according to the job universe and the timing of updates. H = on hold, R = running, I = idle (waiting for a machine to execute on), C = completed, X = removed, < = transferring input (or queued to do so), and > = transferring output (or queued to do so).
PRI
User specified priority of the job, displayed as an integer, with higher numbers corresponding to greater priority.
SIZE
The value of job ClassAd attribute MemoryUsage (in Mbytes), when the attribute is defined, and ImageSize (in Kbytes), otherwise.
CMD
The name of the executable.

If the output option -dag is specified, the OWNER column is replaced with NODENAME for jobs started by the condor_dagman instance.

If the output option -run is specified, the ST, PRI, SIZE, and CMD columns are replaced with:

HOST(S)
The host where the job is running.

If the output option -globus is specified, the ST, PRI, SIZE, and CMD columns are replaced with:

STATUS
The state that HTCondor believes the job is in. Possible values are
PENDING
The job is waiting for resources to become available in order to run.
ACTIVE
The job has received resources, and the application is executing.
FAILED
The job terminated before completion because of an error, user-triggered cancel, or system-triggered cancel.
DONE
The job completed successfully.
SUSPENDED
The job has been suspended. Resources which were allocated for this job may have been released due to a scheduler-specific reason.
UNSUBMITTED
The job has not been submitted to the scheduler yet, pending the reception of the GLOBUS_GRAM_PROTOCOL_JOB_SIGNAL_COMMIT_REQUEST signal from a client.
STAGE_IN
The job manager is staging in files, in order to run the job.
STAGE_OUT
The job manager is staging out files generated by the job.
UNKNOWN
MANAGER
A guess at what remote batch system is running the job. It is a guess, because HTCondor looks at the Globus jobmanager contact string to attempt identification. If the value is fork, the job is running on the remote host without a jobmanager. Values may also be condor, lsf, or pbs.
HOST
The host to which the job was submitted.
EXECUTABLE
The job as specified as the executable in the submit description file.

If the output option -goodput is specified, the ST, PRI, SIZE, and CMD columns are replaced with:

GOODPUT
The percentage of RUN_TIME for this job which has been saved in a checkpoint. A low GOODPUT value indicates that the job is failing to checkpoint. If a job has not yet attempted a checkpoint, this column contains [?????].
CPU_UTIL
The ratio of CPU_TIME to RUN_TIME for checkpointed work. A low CPU_UTIL indicates that the job is not running efficiently, perhaps because it is I/O bound or because the job requires more memory than available on the remote workstations. If the job has not (yet) checkpointed, this column contains [??????].
Mb/s
The network usage of this job, in Megabits per second of run-time.

If the output option -io is specified, the ST, PRI, SIZE, and CMD columns are replaced with:

READ The total number of bytes the application has read from files and sockets.
WRITE The total number of bytes the application has written to files and sockets.
SEEK The total number of seek operations the application has performed on files.
XPUT The effective throughput (average bytes read and written per second) from the application's point of view.
BUFSIZE The maximum number of bytes to be buffered per file.
BLOCKSIZE The desired block size for large data transfers.

These fields are updated when a job produces a checkpoint or completes. If a job has not yet produced a checkpoint, this information is not available.

If the output option -cputime is specified, the RUN_TIME column is replaced with:

CPU_TIME
The remote CPU time accumulated by the job to date (which has been stored in a checkpoint) in days, hours, minutes, and seconds. (If the job is currently running, time accumulated during the current run is not shown. If the job has not produced a checkpoint, this column contains 0+00:00:00.)

The -analyze or -better-analyze options may be used to determine why certain jobs are not running by performing an analysis on a per machine basis for each machine in the pool. The reasons may vary among failed constraints, insufficient priority, resource owner preferences and prevention of preemption by the PREEMPTION_REQUIREMENTS expression. If the analyze option -verbose is specified along with the -analyze option, the reason for failure is displayed on a per machine basis. -better-analyze differs from -analyze in that it will do matchmaking analysis on jobs even if they are currently running, or if the reason they are not running is not due to matchmaking. -better-analyze also produces more thorough analysis of complex Requirements and shows the values of relevant job ClassAd attributes. When only a single machine is being analyzed via -machine or -mconstraint, the values of relevant attributes of the machine ClassAd are also displayed.

Options

-debug
Causes debugging information to be sent to stderr, based on the value of the configuration variable TOOL_DEBUG
-global
(general option) Queries all job queues in the pool.
-submitter submitter
(general option) List jobs of a specific submitter.
-name name
(general option) Query only the job queue of the named condor_schedd daemon.
-pool centralmanagerhostname[:portnumber]
(general option) Use the centralmanagerhostname as the central manager to locate condor_schedd daemons. The default is the COLLECTOR_HOST, as specified in the configuration.
-jobads file
(general option) Display jobs from a list of ClassAds from a file, instead of the real ClassAds from the condor_schedd daemon. This is most useful for debugging purposes. The ClassAds appear as if condor_q -long is used with the header stripped out.
-userlog file
(general option) Display jobs, with job information coming from a job event log, instead of from the real ClassAds from the condor_schedd daemon. This is most useful for automated testing of the status of jobs known to be in the given job event log, because it reduces the load on the condor_schedd. A job event log does not contain all of the job information, so some fields in the normal output of condor_q will be blank.
-cputime
(output option) Instead of wall-clock allocation time (RUN_TIME), display remote CPU time accumulated by the job to date in days, hours, minutes, and seconds. If the job is currently running, time accumulated during the current run is not shown.
-currentrun
(output option) Normally, RUN_TIME contains all the time accumulated during the current run plus all previous runs. If this option is specified, RUN_TIME only displays the time accumulated so far on this current run.
-dag
(output option) Display DAG node jobs under their condor_dagman instance. Child nodes are listed using indentation to show the structure of the DAG.
-expert
(output option) Display shorter error messages.
-globus
(output option) Get information only about jobs submitted to grid resources described as gt2 or gt5.
-goodput
(output option) Display job goodput statistics.
-help [Universe | State]
(output option) Print usage info, and additionally print job universes or job states.
-hold
(output option) Get information about jobs in the hold state. Also displays the time the job was placed into the hold state and the reason why the job was placed in the hold state.
-io
(output option) Display job input/output summaries.
-long
(output option) Display entire job ClassAds in long format.
-run
(output option) Get information about running jobs.
-stream-results
(output option) Display results as jobs are fetched from the job queue rather than storing results in memory until all jobs have been fetched. This can reduce memory consumption when fetching large numbers of jobs, but if condor_q is paused while displaying results, this could result in a timeout in communication with condor_schedd.
-version
(output option) Print the HTCondor version and exit.
-wide
(output option) If this option is specified, and the command portion of the output would cause the output to extend beyond 80 columns, display beyond the 80 columns.
-xml
(output option) Display entire job ClassAds in XML format. The XML format is fully defined in the reference manual, obtained from the ClassAds web page, with a link at http://research.cs.wisc.edu/htcondor/research.html.
-attributes Attr1[,Attr2 ... ]
(output option) Explicitly list the attributes, by name in a comma separated list, which should be displayed when using the -xml or -long options. Limiting the number of attributes increases the efficiency of the query.
-format fmt attr
(output option) Display attribute or expression attr in format fmt. To display the attribute or expression the format must contain a single printf(3)-style conversion specifier. Attributes must be from the job ClassAd. Expressions are ClassAd expressions and may refer to attributes in the job ClassAd. If the attribute is not present in a given ClassAd and cannot be parsed as an expression, then the format option will be silently skipped. The conversion specifier must match the type of the attribute or expression. %s is suitable for strings such as Owner, %d for integers such as ClusterId, and %f for floating point numbers such as RemoteWallClockTime. %v identifies the type of the attribute, and then prints the value in an appropriate format. %V identifies the type of the attribute, and then prints the value in an appropriate format as it would appear in the -long format. As an example, strings used with %V will have quote marks. An incorrect format will result in undefined behavior. Do not use more than one conversion specifier in a given format. More than one conversion specifier will result in undefined behavior. To output multiple attributes repeat the -format option once for each desired attribute. Like printf(3) style formats, one may include other text that will be reproduced directly. A format without any conversion specifiers may be specified, but an attribute is still required. Include $\mathtt{\backslash}$n to specify a line break.

-autoformat[:tn,lVh] attr1 [attr2 ...]
(output option) Display machine ClassAd attribute values formatted in a default way according to their attribute types. This option takes an arbitrary number of attribute names as arguments, and prints out their values. It is like the -format option, but no format strings are required. It is assumed that no attribute names begin with a dash character, so that the next word that begins with dash is the start of the next option. The autoformat option may be followed by a colon character and formatting qualifiers:

t add a tab character before each field instead of the default space character,

n add a newline character after each field,

, add a comma character after each field,

l label each field,

V use %V rather than %v for formatting,

h print headings before the first line of output.

The newline and comma characters may not be used together.

-analyze[:<qual>]
(analyze option) Perform a matchmaking analysis on why the requested jobs are not running. First a simple analysis determines if the job is not running due to not being in a runnable state. If the job is in a runnable state, then this option is equivalent to -better-analyze. <qual> is a comma separated list containing one or more of

priority to consider user priority during the analysis

summary to show a one line summary for each job or machine

reverse to analyze machines, rather than jobs

-better-analyze[:<qual>]
(analyze option) Perform a more detailed matchmaking analysis to determine how many resources are available to run the requested jobs. This option is never meaningful for Scheduler universe jobs and only meaningful for grid universe jobs doing matchmaking. <qual> is a comma separated list containing one or more of

priority to consider user priority during the analysis

summary to show a one line summary for each job or machine

reverse to analyze machines, rather than jobs

-machine name
(analyze option) When doing matchmaking analysis, analyze only machine ClassAds that have slot or machine names that match the given name.
-mconstraint expression
(analyze option) When doing matchmaking analysis, match only machine ClassAds which match the ClassAd expression constraint.
-slotads file
(analyze option) When doing matchmaking analysis, use the machine ClassAds from the file instead of the ones from the condor_collector daemon. This is most useful for debugging purposes. The ClassAds appear as if condor_status -long is used.
-userprios file
(analyze option) When doing matchmaking analysis with priority, read user priorities from the file rather than the ones from the condor_negotiator daemon. This is most useful for debugging purposes or to speed up analysis in situations where the condor_negotiator daemon is slow to respond to condor_userprio requests. The file should be in the format produced by condor_userprio -long.
-nouserprios
(analyze option) Do not consider user priority during the analysis.
-reverse
(analyze option) Analyze machine requirements against jobs.
-verbose
(analyze option) When doing analysis, show progress and include the names of specific machines in the output.

General Remarks

The default output from condor_q is formatted to be human readable, not script readable. In an effort to make the output fit within 80 characters, values in some fields might be truncated. Furthermore, the HTCondor Project can (and does) change the formatting of this default output as we see fit. Therefore, any script that is attempting to parse data from condor_q is strongly encouraged to use the -format option (described above, examples given below).

Although -analyze provides a very good first approximation, the analyzer cannot diagnose all possible situations, because the analysis is based on instantaneous and local information. Therefore, there are some situations such as when several submitters are contending for resources, or if the pool is rapidly changing state which cannot be accurately diagnosed.

Options -goodput, -cputime, and -io are most useful for standard universe jobs, since they rely on values computed when a job produces a checkpoint.

It is possible to to hold jobs that are in the X state. To avoid this it is best to construct a -constraint expression that option contains JobStatus != 3 if the user wishes to avoid this condition.

Examples

The -format option provides a way to specify both the job attributes and formatting of those attributes. There must be only one conversion specification per -format option. As an example, to list only Jane Doe's jobs in the queue, choosing to print and format only the owner of the job, the command line arguments for the job, and the process ID of the job:

%condor_q -submitter jdoe -format "%s" Owner -format " %s " Args -format "ProcId = %d\n" ProcId
jdoe 16386 2800 ProcId = 0
jdoe 16386 3000 ProcId = 1
jdoe 16386 3200 ProcId = 2
jdoe 16386 3400 ProcId = 3
jdoe 16386 3600 ProcId = 4
jdoe 16386 4200 ProcId = 7

To display only the JobID's of Jane Doe's jobs you can use the following.

%condor_q -submitter jdoe -format "%d." ClusterId -format "%d\n" ProcId
27.0
27.1
27.2
27.3
27.4
27.7

An example that shows the difference (first set of output) between not using an option to condor_q and (second set of output) using the -globus option:

 ID      OWNER            SUBMITTED     RUN_TIME ST PRI SIZE CMD
 100.0   smith          12/11 13:20   0+00:00:02 R  0   0.0  sleep 10

1 jobs; 0 idle, 1 running, 0 held



 ID      OWNER          STATUS  MANAGER  HOST                EXECUTABLE
 100.0   smith         ACTIVE fork     grid.example.com       /bin/sleep

An example that shows the analysis in summary format:

$ condor_q -analyze:summary

-- Submitter: submit-1.chtc.wisc.edu : <192.168.100.43:9618?sock=11794_95bb_3> :
 submit-1.chtc.wisc.edu
Analyzing matches for 5979 slots
            Autocluster  Matches    Machine     Running  Serving
 JobId     Members/Idle  Reqmnts  Rejects Job  Users Job Other User Avail Owner
---------- ------------ -------- ------------ ---------- ---------- ----- -----
25764522.0  7/0             5910        820   7/10       5046        34   smith
25764682.0  9/0             2172        603   9/9        1531        29   smith
25765082.0  18/0            2172        603   18/9       1531        29   smith
25765900.0  1/0             2172        603   1/9        1531        29   smith

An example that shows summary information by machine:

$ condor_q -ana:sum,rev

-- Submitter: s-1.chtc.wisc.edu : <192.168.100.43:9618?sock=11794_95bb_3> : s-1.chtc.wisc.edu
Analyzing matches for 2885 jobs
                                Slot  Slot's Req    Job's Req     Both
Name                            Type  Matches Job  Matches Slot    Match %
------------------------        ---- ------------  ------------ ----------
slot1@INFO.wisc.edu             Stat         2729  0                  0.00
slot2@INFO.wisc.edu             Stat         2729  0                  0.00
slot1@aci-001.chtc.wisc.edu     Part            0  2793               0.00
slot1_1@a-001.chtc.wisc.edu     Dyn          2644  2792              91.37
slot1_2@a-001.chtc.wisc.edu     Dyn          2623  2601              85.10
slot1_3@a-001.chtc.wisc.edu     Dyn          2644  2632              85.82
slot1_4@a-001.chtc.wisc.edu     Dyn          2644  2792              91.37
slot1@a-002.chtc.wisc.edu       Part            0  2633               0.00
slot1_10@a-002.chtc.wisc.edu    Dyn          2623  2601              85.10

Exit Status

condor_q will exit with a status value of 0 (zero) upon success, and it will exit with the value 1 (one) upon failure.

Author

Center for High Throughput Computing, University of Wisconsin-Madison

Copyright

Copyright © 1990-2014 Center for High Throughput Computing, Computer Sciences Department, University of Wisconsin-Madison, Madison, WI. All Rights Reserved. Licensed under the Apache License, Version 2.0.
next up previous contents index
Next: condor_qedit Up: 11. Command Reference Manual Previous: condor_procd   Contents   Index